JVC HR-J4003UM manual 20C to 60C -4F to140F, Maximum recording time, EIA monochrome signal

Page 38

38

GENERAL

Power requirement	: AC 110 – 220 V` , 50/60 Hz
Power consumption	: 19 W
Temperature
Operating	: 5°C to 40°C (41°F to 104°F)
Storage	: –20°C to 60°C (–4°F to140°F)
Operating position	: Horizontal only
Dimensions (W x H x D) : 400 x 94 x 291 mm
	(15-3/4" x 3-3/4" x 11-1/2")
Weight	: 3.7 kg (8.2 lbs)
Format	: VHS NTSC standard
Maximum recording time
SP	: 210 min. with ST-210 video
	cassette
EP	: 630 min. with ST-210 video
	cassette
VIDEO/AUDIO
Signal system	: NTSC-type color signal and
	EIA monochrome signal, 525
Recording/	lines/60 fields
Recording/
Playback system	: DA-4 (Double Azimuth) head
	helical scan system
Signal-to-noise ratio	: 45 dB
Horizontal resolution	: 240 lines
Frequency range	: 20 Hz to 20,000 Hz
Input/Output	: RCA connectors (IN x 2,
	OUT x 1)
TUNER
Tuning system	: Frequency-synthesized tuner
Channel coverage
VHF	: Channels 2–13
UHF	: Channels 14–69
CATV	: 113 Channels
RF output	: Channel 3 or 4 (switchable;
	preset to Channel 3 when

shipped) 75 ohms, unbalanced

	SPECIFICATIONS
TIMER
Clock reference	: Quartz
Program capacity	: 1-year programmable timer/
	8 programs
Memory backup time	: Approx. 18 hours
ACCESSORIES
Provided accessories	: RF cable,
	Infrared remote control unit,
	“AAA” battery x 2,
	Conversion plug

Specifications shown are for SP mode unless otherwise specified. E. & O.E. Design and specifications subject to change without notice.

Image 38

Contents HR-J4003UM This unit is produced to comply with Standard IEC Publ Do not place the VCRContents Basic Connections Clock SET Date and Time Access Clock SET ScreenClock Setting Make CorrectionsAccess Band Screen Access Main MenuAccess Tuner SET TunerPress Menu as many times as necessary Perform Auto Channel SETReturn to Normal Screen Access Manual Access Tuner SET ScreenAccess AFC Screen Channel SET ScreenFind Program Start Point Simple PlaybackLoad a Cassette Start PlaybackSimple Recording Playback PlaybackFRAME-BY-FRAME During PlaybackRE-ENGAGE Automatic Tracking Engage Manual Tracking ModeAdjust Manual Tracking Manual TrackingSuperimpose Access Function SETAccess Superimpose Start Repeat Access Distant CodeSkip Over Unwanted Sections Stop RepeatMemory Activate Instant ReviewActivate Counter Return to Counter Position ZeroTape Position Indicator Next-Function MemorySystem Access Main Menu ScreenS.T. Picture System Quality of the tape Use, then recording RecordingPress and hold REC Begins with the picture Level optimizedTape in use PlaybackBefore beginning, perform steps 1 and 2 on Recording Engage TV ModeReset Counter to Zero Select Channel for ViewingEngage ITR Mode Instant Timer Recording ITROn-Screen Timer Programming Access Program SET ScreenInformation Select Program NumberSET Program Cancel a Program Disengage TimerAccess Program SET RE-ENGAGE TimerPlace the arrow next to Auto SP/EP Timer by Access Auto SP/EPAuto SP/EP Timer Your choice on orAccess Auto Timer Auto TimerEdit From a Camcorder Load Cassettes SET RECORDER’S Input ModeEdit To Or From Another Control Two JVC VCRsRandom As- semble Editing Prepare for EditingEND R.A. Edit Locate EDIT-OUT PointStart R.A. Edit Turn on the TV SET Remote ControlTV Multi-Brand Remote Control SET TV Brand CodeMake sure the window side is up, Remote control won’t function Batteries are dischargedCassette gets stuck partway Has not been programmed correctly Cassette is automatically Timer againWhen scanning channels, some Questions and Answers MBR Multi-Brand Remote Code Setting List Of TermsRamdom Assemble Editing connector pg PowerRemote Control Provided Front Display PanelMaximum recording time EIA monochrome signal20C to 60C -4F to140F Frequency-synthesized tuner