JVC HR-J4008UM manual Specifications, General

Page 16

Specifications

GENERAL

Power requirement	: AC 110 V – 220 Vd, 50 Hz/60 Hz
Power consumption
Power on	:	14 W
Power off	:	2.0 W
Temperature
Operating	:	5°C to 40°C
Storage	:	–20°C to 60°C
Operating position	:	Horizontal only
Dimensions (W x H x D) :		360 mm x 94 mm x 247 mm
Weight	:	3.0 kg
Format	:	VHS NTSC standard
Maximum recording time
SP	:	210 min. with ST-210 video cassette
EP	:	630 min. with ST-210 video cassette

VIDEO/AUDIO

Signal system	: NTSC-type color signal and EIA
		monochrome signal, 525 lines/
		60 fields
Recording/Playback	: DA-4 (Double Azimuth) head helical
system		scan system
Signal-to-noise ratio	:	45 dB
Horizontal resolution	:	230 lines
Frequency range	: 70 Hz to 10,000 Hz
Input/Output	:	RCA connectors (IN x 1, OUT x 1)

TUNER

Tuning system	:	Frequency-synthesized tuner
Channel coverage
VHF	: Channels 2–13
UHF	: Channels 14–69
CATV	:	113 Channels
RF output	: Channel 3 or 4 (switchable; preset to
		Channel 3 when shipped) 75 ohms,
		unbalanced

TIMER

Clock reference	:	Quartz
Program capacity	:	1-year programmable timer/
		8 programs
Memory backup time	: Approx. 6 months
		Estimated figure based on supplied
		fresh battery; actual performance may
		differ.

ACCESSORIES

Provided accessories	: RF cable (F-type),
	Lithium battery CR2025,
	Infrared remote control unit,
	“AA” battery x 2,
	Conversion plug

Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice.

Image 16

Contents HR-J4008UM Dear CustomerHow to use the Remote Video heads cleaningButtons, Connectors and Indicators Front PanelRear Panel Display panelRemote On-screen display12345 Number keysCheck contents Basic ConnectionsSituate VCR Connect VCR to TVRF Connection Installing/Removing the lithium batteryAV Connection Plug&Play Setting Language Setting Initial SettingsClock Setting Tuner Setting Auto Channel SetSet screen Perform Auto Channel SetPlayback Features Adjusting tracking condition Tracking adjustmentPlayback Basic PlaybackRecording Basic RecordingTimer Recording Recording FeaturesExpress Timer Programing Specifying recording length Instant Timer Recording ITRDisengage timer Access Program screenCancel or change program setting Reengage timer recording standby modeChecking tape position Other FunctionsSelect program to modify Function settings Change settingFunction Set screen Select FunctionSelect input mode on recording VCR Select edit modeEditing Make connectionsSpecifications General