JVC HR-J4008UM manual RF Connection, AV Connection, Installing/Removing the lithium battery

Page 6

– Basic Connections –

RF Connection

ADisconnect the TV antenna from the TV.

BConnect the TV antenna cable to the ANT. IN terminal on the rear of the VCR.

CConnect the supplied RF cable between the RF OUT terminal on the rear of the VCR and the TV’s antenna input terminal.

AV Connection

(improves picture quality during tape playback.)

If your TV is equipped with audio/video input connectors

AConnect the antenna, VCR and TV as shown in the illustration.

BConnect an audio/video cable between the AUDIO/VIDEO OUT connectors on the rear of the VCR and the audio/video input connectors on the TV.

●Even if you are using audio/video cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another.

DConnect VCR to power source

Plug the AC power cord into an AC outlet.

ESet VCR channel

The VCR channel is the channel on which you can watch the picture from the VCR on the TV when only using the RF connection. When the VCR is turned off, press STOP/EJECT (0) on the VCR for more than 5 seconds. “CH3” appears on the display panel. Press PR+/– on the Remote to select “CH3”, “CH4” or “CH–”(OFF), then press OK.

●If Plug&Play or Tuner setting has not previously been performed, the Language Select screen appears and Plug&Play takes place automatically.

●The VCR channel is preset to “CH3”. Set to “CH4” if CH3 is used for broadcasting in your area.

FFinal preparation for use

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

Installing/Removing the lithium battery

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery’s service life will be drastically shortened.

AMake sure that the power plug is connected to an AC outlet and turn off the VCR power.

BOpen the battery cover while pressing the release tab as illustrated.

CInsert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch downward using a pointed non-metallic object, then pull out the lithium battery.

DClose the battery cover until it clicks in place.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents HR-J4008UM Dear CustomerHow to use the Remote Video heads cleaningRear Panel Buttons, Connectors and IndicatorsFront Panel Display panel12345 RemoteOn-screen display Number keysSituate VCR Check contentsBasic Connections Connect VCR to TVInstalling/Removing the lithium battery RF ConnectionAV Connection Initial Settings Plug&Play Setting Language SettingClock Setting Set screen Tuner SettingAuto Channel Set Perform Auto Channel SetPlayback Playback FeaturesAdjusting tracking condition Tracking adjustment Basic PlaybackRecording Basic RecordingExpress Timer Programing Timer RecordingRecording Features Specifying recording length Instant Timer Recording ITRCancel or change program setting Disengage timerAccess Program screen Reengage timer recording standby modeOther Functions Checking tape positionSelect program to modify Function Set screen Function settingsChange setting Select FunctionEditing Select input mode on recording VCRSelect edit mode Make connectionsSpecifications General
Top Page Image Contents