JVC HR-J4008UM manual How to use the Remote, Video heads cleaning

Page 2

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the VCR, Remote or video cassette.

1.DO NOT place the VCR ...

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the VCR’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

3.DO NOT place heavy objects on the VCR or Remote.

4.DO NOT place anything which might spill on top of the VCR or Remote.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5.DO NOT expose the apparatus to dripping or splashing.

6.DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.

7.DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8.AVOID violent shocks to the VCR during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCR’s power turned on for a few hours to let the moisture dry.

How to use the Remote

Before use, insert two AA size batteries into the Remote with the polarity ( and ) matched correctly as indicated on the battery compartment or on the lid.

The Remote can operate most of your VCR’s functions, as well as basic functions of JVC TV sets.

Point the Remote toward the remote sensor on the target component.

The maximum operating distance of the remote control is about 8 m.

NOTE:

If the Remote does not work properly, remove its batteries, wait for a few seconds, replace the batteries and then try again.

Video heads cleaning

Use a dry cleaning cassette — TCL-2UX — when:

Rough, poor picture appears while a tape is played back.

The picture is unclear or no picture appears.

“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “ON”).

Image 2
Contents HR-J4008UM Dear CustomerHow to use the Remote Video heads cleaningRear Panel Buttons, Connectors and IndicatorsFront Panel Display panel12345 RemoteOn-screen display Number keysSituate VCR Check contentsBasic Connections Connect VCR to TVAV Connection Installing/Removing the lithium batteryRF Connection Clock Setting Initial SettingsPlug&Play Setting Language Setting Set screen Tuner SettingAuto Channel Set Perform Auto Channel SetPlayback Playback FeaturesAdjusting tracking condition Tracking adjustment Basic PlaybackRecording Basic RecordingExpress Timer Programing Timer RecordingRecording Features Specifying recording length Instant Timer Recording ITRCancel or change program setting Disengage timerAccess Program screen Reengage timer recording standby modeSelect program to modify Other FunctionsChecking tape position Function Set screen Function settingsChange setting Select FunctionEditing Select input mode on recording VCRSelect edit mode Make connectionsSpecifications General