JVC HR-J261MS, HR-J267MS instruction manual Recording, Playback, Or press Record on the recorder

Page 19

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

DURING B.E.S.T.

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP (or EP) modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording

(☞ pg. 17).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set "B.E.S.T." to "OFF" in step 4 on page 18.

EN19

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. "BEST" appears blinking on the recorder's display panel.

NOTES:

●When watching a tape recorded with "B.E.S.T." set to "ON", it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 18.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HR-J267MS HR-J261MS Auto Head Cleaner Safety PrecautionsDo not place the recorder Connect Recorder to Mains Check ContentsBasic Connections Situate RecorderEN I Nitial Sett Ings Access Video Channel SET ModeVideo Channel Set Select TV SystemSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Date Auto Set UpSelect Language SET TimePress OK or Push JOG Þ During Auto Set UpStart Auto Channel SET Major Countries TV SystemTurn on the Recorder Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysSelect Language Access Initial SET ScreenPress Push JOG %Þto place the pointer next to Clock SetPress Press MenuStart Playback Basic PlaybackLoad a Cassette PointActivate HIGH-SPEED Search Playback FeaturesSearch PlaybackManual Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Instant ReviewIndex Search Activate Index SearchActivate Repeat Playback EN PlaybackPicture Control Access Main Nenu ScreenSET Mode Tape Position IndicatorBasic Recording Select Channel to Watch Recording FeaturesReset Counter Engage ITR ModeEN Recording Access Main Menu ScreenS.T. Picture System Return to NormalPlayback RecordingOr press Record on the recorder Enter Programme Date Express Timer ProgrammingTimer Recording Start TimeReturn to Normal Timer ModeEngage Recorders Check, Cancel And Replace Programmes Disengage Timer ModeCancel or Replace a Programme Return to Timer ModeAuto Timer Auto SP→LP TimerReturn to Normal Screen Edit To Another Video Recorder Source player Edit From a Camcorder Or Another Video RecorderSET Recorders Input ModeOff-Air Recording Setting Of The Colour System Select ButtonsMode Display Mode DescriptionPlayback equipment Tape-To-Tape EditingRecorded tape HR-J267MS/HR-J261MS Recorded tapeAuto Channel Set ModeSelect TV System Tuner SETSET Desired Station Access Tuner SETAccess Channel List Select PositionSwap Channel Positions Access Channel ListEN Tuner SET Delete a ChannelFINE-TUNE Fine-Tuning ChannelsTry manual tracking. pg TroubleshootingIf youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteRecording Timer againNew one. pg OubleshootingPlayback Recording Questions and Answer S E NFront View IndexDisplay Panel Prog +/-,TV VOL +/-, TV Muting Remote ControlSpecification S HR-J261MS
Top Page Image Contents