JVC HR-J261MS Access Tuner SET, Access Channel List, Select Position, SET Desired Station

1

1 2 3

4 5 6

7 8 9

0 4

2

MENU

3 PUSH JOG

OK

EN29

Manual Channel Set

Store channels that were not stored during Auto Set Up (☞ pg. 6) or Auto Channel Set (☞ pg. 28).

	ACCESS TUNER SET
	SCREEN
1 Perform steps 1 – 3 of "Auto Channel Set" on page 28.
2	ACCESS CHANNEL LIST
	Press PUSH JOG %Þ to place the pointer next to "CH
	EDIT", then press OK or PUSH JOGÞ.
	SELECT POSITION
	Press PUSH JOG %Þ to place the pointer next to an
3 open channel position, then press OK or PUSH JOGÞ.
4	SELECT BAND
	Press PUSH JOG %Þ to place the pointer next to the
	band of your choice, then press OK to initiate Manual
	Channel Set.	MANUAL CH SET
	BAND SELECT
	VHF L	PLEASE WAIT
	VHF H
	UHF	VHF L 100MHZ
	[5/°] =	[MENU] : EXIT
	[MENU] : EXIT
	SET DESIRED STATION
	The screen to the right
	appears when a station is	STORE
5 detected.		CONTINUE
	If you do not want to store
	the detected station...
	Press PUSH JOG %Þ to
	place the pointer next to	[5/°] =
	"CONTINUE", then press	[MENU] : EXIT
	OK or PUSH JOGÞ.
	Channel search will resume.
	If you want to store the detected station...
	Press PUSH JOG %Þ to place the pointer next to
	"STORE", then press OK or PUSH JOGÞ. The Channel
	List appears again.

●The blueback screen and the TV picture currently being broadcast appear alternately for 8 seconds each.

●If you want to store another channel, repeat steps 3 – 5.

●When channel search completes for that band, the Band Select screen appears again. To set channels for other bands, select another band and start Manual Channel Set again (☞ step 4 and 5).

●For fine tuning adjustment, see "Fine-Tuning Channels" on page 31.

RETURN TO NORMAL

SCREEN

6 Press MENU.