JVC HR-J267MS Access Channel List, EN Tuner SET, Delete a Channel, Swap Channel Positions

30ENTUNERSET(cont.)

Delete A Channel

	ACCESS TUNER SET
1	SCREEN
	Perform steps 1 – 3 of "Auto Channel Set" on page 28.
2	ACCESS CHANNEL LIST
	Press PUSH JOG %Þ to place the pointer next to "CH
	EDIT", then press OK or PUSH JOGÞ.
3	SELECT CHANNEL
	Press PUSH JOG %Þto	CH	FRQ	SYS	CH FRQ		SYS
	until the channel you want	01	150	BG	07	229	BG
	to delete begins blinking.	02	165	BG	08	237	BG
		03	195	BG	09	355	BG
		04	205	BG	10	365	BG
		05	213	BG	11	374	BG
		06	221	BG	12	384	BG
		[5/°] = [CANCEL] : DELETE
		[5/°] =		: EDIT
		[MENU] : EXIT
4	DELETE CHANNEL
	Press CANCEL.	CH	FRQ	SYS	CH FRQ		SYS
		01	– – – – –		07	229	BG
	● To re-store it, simply
		02	165	BG	08	237	BG
	press PUSH JOG%.	03	195	BG	09	355	BG
		04	205	BG	10	365	BG
	● Repeat steps 3 – 4 as	05	213	BG	11	374	BG
	necessary.	06	221	BG	12	384	BG
		[5/°] = [5] : ADD
		[MENU] : EXIT
	RETURN TO NORMAL
5	SCREEN
	Press MENU.

Swap Channel Positions

Example:To swap CH03 and CH09.

	ACCESS TUNER SET
1	SCREEN
	Perform steps 1 – 3 of "Auto Channel Set" on page 28.
2	ACCESS CHANNEL LIST
	Press PUSH JOG %Þto place the pointer next to "CH
	EDIT", then press OK or PUSH JOGÞ.
3	SELECT POSITION (e.g. 03)
	Press PUSH JOG %Þuntil	CH FRQ SYS			CH FRQ SYS
	the section of CH "03"	01	150	BG	07	229	BG
	begins blinking, then press	02	165	BG	08	237	BG
		03	195	BG	09	355	BG
	OK or PUSH JOGÞ.	04	205	BG	10	365	BG
		05	213	BG	11	374	BG
	● Only "03" will blink.	06	221	BG	12	384	BG
		[0 – 9]: INPUT CH
			: FINE TUNING
		[MENU] : EXIT
4	SELECT POSITION (e.g. 09)
	Press NUMBER keys to	CH FRQ SYS			CH FRQ SYS
	input "0" and "9".	01	150	BG	07	229	BG
		02	165	BG	08	237	BG
	● The two selected	03	355	BG	09	195	BG
		04	205	BG	10	365	BG
	channels will be	05	213	BG	11	374	BG
	swapped.	06	221	BG	12	384	BG
		[5	]: CANCEL
	● To cancel the channel		: OK
	swapping, press PUSH	[MENU] : EXIT
	JOG%.
5	STORE NEW POSITIONS
	Press OK or PUSH JOGÞ.
	● Repeat steps 3 – 5 as necessary.
	RETURN TO NORMAL
6	SCREEN
	Press MENU.