JVC InHR-J4404UM manual Playback, Tape in use

Page 21

PLAY

ª £

2 5/8 3

1 2 3

4 5 6

7 8 9

1••

•• Á

¦ 7 8

4¢

Playback

The VCR assesses the quality of the tape once you initiate playback.

Before beginning, perform steps 1 and 2 on page 11 ("Simple playback").

1	START PLAYBACK
	Press PLAY.

	● The VCR adjusts the
	playback picture quality
	playback picture quality
	based on the quality of	B.E.S.T.PICTURE SYSTEM
	based on the quality of	B.E.S.T.PICTURE SYSTEM
	the tape in use.
	the tape in use.

NOTES:

●When using rental tapes, or tapes recorded on other VCRs, set “PLAYBACK” in step 4 of the Preparation procedure to either “ON” or “OFF” as desired

(☞ pg. 19).

●The B.E.S.T. Picture System screen only appears at the beginning of automatic tracking. Even though the screen doesn't appear after that, the B.E.S.T. function is operative.

●SUPERIMPOSE must be set to "ON" or the B.E.S.T. Picture System screen will not appear (☞ pg. 16).

Image 21

Contents HR-J4404UM This unit is produced to comply with Standard IEC Publ Dear CustomerContents Basic Connections Auto Tuner Set Plug & PlayPress Menu as many times as necessary During Plug & PlayClock Clock Setting Access Clock SETSET Date and Time Make CorrectionsAccess Tuner SET Access Main MenuAccess Band Screen TunerReturn to Normal Screen Perform Auto Channel SETAccess Manual Access AFC ScreenMake Selection Channel SET ScreenLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Playback Features Adjust Manual Tracking Engage Manual Tracking ModeRE-ENGAGE Automatic Tracking Start RepeatVideo Stabilizer Access Function SET Access SuperimposeSuperimpose Access Distant Code Skip Over Unwanted SectionsStart Search Activate Counter MemoryReturn to Counter Position Zero System Screen S.T. Picture SystemPress and hold REC RecordingQuality of the tape Use, then recording Begins with the picture Level optimizedTape in use PlaybackEngage TV Mode Recording FeaturesReset Counter to Zero Select Channel for ViewingEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press RECAccess ON-SCREEN Menu On-Screen Timer ProgrammingAccess Program SET Screen InformationPress just once to access the Auto Timer screen Engage Timer ModePress TIMER. The VCR turns off automatically Until the item you want to change begins blinkingAccess Program SET Disengage TimerCancel a Program RE-ENGAGE TimerAccess Function SET Screen Access Main Menu ScreenAuto SP/EP Timer SP modeAccess Auto Timer Screen Access Auto TimerAuto Timer Or Push JOG%ÞEdit To Or From Another SET RECORDER’S Input Edit From a CamcorderMode PlayerTurn on the TV TV Multi-Brand Remote ControlSET TV Brand Code Operate TVTurn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOXEx. To set remote control to RCA Satellite Receiver Multi Brand Remote ControlTurn on the Satellite Receiver BrandSET Remote Control Unplug Vcrs PowerPlug in Power Cord Turn VCR Power onQuestions and Answer S Make sure the window side is up, Cassette gets stuck partwayTimer again When scanning channels, someHas not been programmed correctly Cassette is automatically Index Rear View Remote Control Provided Installing BatteriesHow To Use Do not block the VCR’s ventilation openings Do not place the VCRDo not place heavy objects on the VCR or remote ControlEMO Memo HR-J4404UM

Playback

START PLAYBACK

the tape in use.