SPECIFICATIONS
41
GENERAL
Power requirement | : AC 110 – 220 V` , 50/60 Hz |
Power consumption | : 19 W |
Temperature |
|
Operating | : 5°C to 40°C (41°F to 104°F) |
Storage | : |
Operating position | : Horizontal only |
Dimensions (W x H x D) : 400 x 94 x 276 mm | |
| |
Weight | : 3.6 kg (8.0 lbs) |
Format | : VHS NTSC standard |
Maximum recording time |
|
SP | : 210 min. with |
| cassette |
EP | : 630 min. with |
| cassette |
VIDEO/AUDIO |
|
Signal system | : |
| EIA monochrome signal, 525 |
Recording/ | lines/60 fields |
| |
Playback system | : |
| helical scan system |
: 45 dB | |
Horizontal resolution | : 240 lines |
Frequency range | : 70 Hz to 10,000 Hz |
Input/Output | : RCA connectors |
| (IN x 1, OUT x 1) |
TUNER
Tuning system | : |
Channel coverage |
|
VHF | : Channels |
UHF | : Channels |
CATV | : 113 Channels |
RF output | : Channel 3 or 4 (switchable; |
| preset to Channel 3 when |
| shipped) 75 ohms, |
TIMER | unbalanced |
| |
Clock reference | : Quartz |
Memory backup | : Lithium battery |
Program capacity | : |
| 8 programs |
ACCESSORIES |
|
Provided accessories | : RF cable, |
| Infrared remote control unit, |
| Lithium battery CR2025, |
| “AA” battery x 2, |
| Conversion plug |
Specifications shown are for SP mode unless otherwise specified. E. & O.E. Design and specifications subject to change without notice.
Failure to heed the following precautions may result | **MOISTURE CONDENSATION | |
in damage to the VCR, remote control or video | Moisture in the air will condense on the VCR when you | |
cassette. | move it from a cold place to a warm place, or under | |
1. | DO NOT place the VCR . . . | extremely humid |
| ... in an environment prone to extreme temperatures or | the surface of a glass filled with cold liquid. Moisture |
| humidity. | condensation on the head drum will cause damage to the |
| ... in direct sunlight. | tape. In conditions where condensation may occur, keep the |
| ... in a dusty environment. | VCR’s power turned on for a few hours to let the moisture |
| ... in an environment where strong magnetic fields are | dry. |
| generated. | **ABOUT HEAD CLEANING |
| ... on a surface that is unstable or subject to vibration. | |
2. | DO NOT block the VCR’s ventilation openings. | Accumulation of dirt and other particles on the video heads |
3. | DO NOT place heavy objects on the VCR or remote | may cause the playback picture to become blurred or |
| control. | interrupted. Be sure to contact your nearest JVC dealer if such |
4. | DO NOT place anything which might spill on top of the | troubles occur. |
| VCR or remote control. |
|
5. | AVOID violent shocks to the VCR during transport. |
|
|
|
|