SPECIAL
FEATURES
31
TV Multi-Brand Remote Control
POWER
1 | 2 | 3 |
|
4 | 5 | 6 | TV/VCR |
NUMBER |
|
| |
8 | 9 |
| |
7 |
|
0
ENTER
CH
TV VOL. +/– 
1•• | 3 | •• Á |
¦ 7 8
4¢
STOP
TV BRAND NAME | BRAND CODE |
JVC | 01 |
GRADIENTE | 02, 11, 12, 16 |
PHILIPS | 03 |
CCE | 03 |
SANYO | 04 |
PHILICO/HITACHI | 05 |
SHARP | 06 |
TOSHIBA | 07 |
MITSUBISHI | 08 |
PHILICO/DAEWOO | 09 |
SAMSUNG | 10 |
GOLDSTAR | 11 |
RCA | 12 |
PANASONIC | 13 |
GRUNDIG | 14 |
SONY | 15 |
NEC | 16 |
PHILICO | 17 |
NOBLEX | 18 |
|
|
(Ex.) To set remote control to PHILIPS 03:
TV 0/AUX 37STOP
| Release | |
Hold | Press in succession | |
down | ||
|
The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below.
TURN ON THE TV
1 Turn the power on using the TV's remote control.
SET TV BRAND CODE
2 Refer to the chart below. While holding down TV on the VCR's remote control, enter your TV’s brand code using the NUMBER keys, then press STOP.
Follow the example shown at bottom left.
●Once you have set the remote control to operate the TV, you don’t have to repeat this step until you replace your remote control’s batteries.
●GRADIENTE has four codes. If the TV does not function with one code, try entering another.
OPERATE TV
3 Press TV and POWER in succession to see if the TV’s power goes off as it should. If it does, try other operations.
●The POWER, TV/VCR, CH 5°, TV VOL. +/– and NUMBER keys on the remote can all be used to operate the TV. *For some brands of TV, you must press ENTER after having pressed the NUMBER keys.
●To operate your TV, press TV first, then press the corresponding button: POWER, TV/VCR, CH 5°, and NUMBER keys (or ENTER). TV VOL. can be used without pressing TV.
●If you have a JVC TV equipped with Hyper Surround
or Live Effex, the 
button may work to operate it.
NOTE:
Depending on the kind of TV, there may be cases where some or all functions cannot be operated using the remote control.