JVC HR-VP782U manual Select input mode on this VCR, Access Main Menu screen on this VCR

Page 45

EN 45

You can use a camcorder as the playback VCR and your VCR as the recording VCR

1 Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s video audio/video input connectors.

When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.

2 Load a cassette

Insert the cassette to be recorded on into this VCR (for recording).

3 Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Press CH5°.

On the Remote:

Press the Number key "0 (AUX)" or CH +/–.

4 Access Main Menu screen on this VCR

Press MENU.

5 Access Function Set screen

On the front panel:

Press CH5° to move the highlight bar (arrow) to “FUNCTION SET”, then press OK.

On the Remote:

Press SHUTTLE PLUS %Þ to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or SHUTTLE PLUS #.

6Select “EDIT” for Picture Control

Follow the procedure described on pages 38 and 39.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 7.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 8.

7Enable remote pause function

On the front panel:

 

FUNCTION

 

 

Press CH5° to move

 

=PICTURE CONTROL

ON

 

 

PICTURE CONTROL

AUTO

 

the highlight bar (arrow)

 

AUTO TIMER

OFF

 

to “AV COMPU-LINK”,

 

SUPERIMPOSE

ON

 

 

AUTO SP=EP TIMER

OFF

 

then press OK to set it to

 

VIDEO STABILIZER

OFF

 

 

NEXT PAGE

 

 

“OFF”.

 

 

 

SELECT WITH (5,°) AND (OK)

 

On the Remote:

PRESS (MENU) TO END

 

 

 

 

 

 

Press SHUTTLE PLUS

 

 

 

 

%Þ to move the

 

PREVIOUS PAGE

 

 

highlight bar (arrow) to

 

 

 

 

BLUE BACK

ON

 

“AV COMPU-LINK”,

 

2ND AUDIO RECORD

OFF

 

then press OK or

 

AUDIO MONITOR

HI-FI

 

 

=AV COMPU-LINK

OFF

 

SHUTTLE PLUS # to set

 

 

 

 

it to “OFF”.

 

 

 

 

 

SELECT WITH (5,°) AND (OK)

 

The REMOTE PAUSE/

 

PRESS (MENU) TO END

 

 

AV COMPU-LINK

 

 

 

 

connector works as the AV Compulink

 

 

connector when “AV COMPU-LINK” is set to “ON” ; pg. 38 and 41), and works as the Remote Pause connector when “AV COMPU- LINK” is set to “OFF”.

8Return to normal screen

Press MENU.

9Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.

0Start recording

On the front panel:

Press REC ( ƒ ).

On the Remote:

Press REC ( ƒ ) and PLAY ( 3 ) at the same time.

If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 38 and 39).

Page 44 Page 46
Image 45
Page 44 Page 46
Contents HR-VP782U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cableSituate VCR Check contentsConnect VCR to TV Final preparation for usePerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Clock and tuner channels will be set automaticallyAccess Initial Set screen Language SettingSelect language Return to normal screenClock Setting 10 ENPreparations Set Auto Clock to on Setting clock semiautomaticallySelect host channel Select time zoneSelect D.S.T. mode Setting clock manually12 EN Manual Clock SetTuner Setting Access Tuner Set screenPerform Auto Channel Set Access Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsSituate Controller Cable Box Control SettingAttach Controller Connect cable box to VCRAccess Cable Box Set screen Access Main Menu screen on VCR16 EN Turn on cable boxAccessPress OKCable. Box Brand Set screen Enter cable box brandIf the cable boxs channel does not change to 18 EN How to control the DBS receiverConnect DBS receiver to VCR ControllerAccess DBS Receiver Set screen Turn on DBS receiverSelect DBS receiver output channel Access DBS Receiver Brand Set screen 20 ENEnter DBS Receiver’s brand Basic Playback Load a cassetteStart playback 22 EN Basic Playback FeaturesChanging display information Checking tape positionAdjusting tracking condition Selecting monitor soundAutomatic operations after Access distant code Locating beginning of timer24 EN Locating beginningRecording BasicSelect recording channel Set tape speed26 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Accidental erasure prevention28 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playback30 EN VCR Plus+ Timer ProgramingTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Press SP/EPVCR Plus+ Setup 32 ENVCR Plus+ guide channel matching Input guide channel number Access Guide Channel Set screen34 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials 36 EN Checking program settingsConfirm overlapping programs Select program to modifyOverlapping programs blink on the screen Change setting Useful Function Settings38 EN Select FunctionWhen this function is set to OFF When this function is set to onFor Example 40 ENThis VCR 42 EN PreventingConnection Edit To Or From Another44 EN Edit From CamcorderThis VCR for recording Camcorder for playbackAccess Main Menu screen on this VCR Select input mode on this VCREnable remote pause function Select Edit for Picture Control46 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingEnter cable box brand code Operate cable box48 EN DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeSet remote control code for Remote Changing Remote Control CodeUnplug VCR Plug in VCR50 EN TroubleshootingTimer Recording 52 EN Other ProblemsWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?List of terms 54 ENFront display panel Front panel56 EN Rear panelOn-screen display Remote How to use the RemoteUsable cassettes 58 ENFull-Size VHS 30 ST-30 Compact VHS* TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40HOW to Locate Your JVC Service Center 60 EN Limited WarrantyMemo 62 EN Page HR-VP782U
Top Page Image Contents