JVC SR-9080 appendix Recording/Playback Speed Mode Selection, Switch Setting During Recording

5 PREPARATION

E model

6 RECORDING

5-2 Recording/Playback Speed Mode Selection
			�
			SR-9080E
			REC
REC	STOP REC		EJECT OPERATE
	CHECK		OPERATE
			RESET/
			CANCEL ON SCREEN
REW REVERSE PAUSE PLAY FF			SHIFT
	TRACKING	V. LOCK	TIMER SEARCH DISPLAY LOCK CNT RESETMENU TIME MODE
FIELD REV	FIELD ADV – +	– +	– S E T +

		[OPERATE] button	Record/playback speed
	[TIME MODE +/–] buttons		indication
1

6-1 Switch Setting During Recording
		[ON SCREEN 7] button		[ON SCREEN f] button
				�
				SR-9080U
				REC
REC	STOP REC			EJECT OPERATE
	CHECK	OPERATE
		HDR	RESET/	ON SCREEN
			CANCEL
REW REVERSE PAUSE PLAY FF				SHIFT
	TRACKING	V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET	MENU	TIME MODE
FIELD REV	– +	– +		– S E T +
	FIELD ADV

[REC] indicator

2Press the [OPERATE] button to turn the operating mode on.
Select the Record or Playback speed with the [TIME MODE +/–] button. Refer to the table below.
The selected recording or playback speed mode is shown on the display.
		E-180	Recording/	Audio
Display	Mode	Available recording	playback interval	recording
		time (hour)	(sec.)
3H	Standard (SP)	3	—
L12H	12-hour linear slow	12	0.1	Possible
L24H	24-hour linear slow	24	0.18
48H	48-hour timelapse	48	0.34
72H	72-hour timelapse	72	0.52
120H	120-hour timelapse	120	0.82	Impossible
168H	168-hour timelapse	168	1.14
240H	240-hour timelapse	240	1.62
480H	480-hour timelapse	480	3.22
960H	960-hour timelapse	960	6.42

•Available recording time may vary depending on the type of cassette used.

•In the L12H and L24H Linear Slow mode, the tape runs continuously while sound is recorded. Pictures are timelapse- recorded.

•For best results, use a E-180 tape.

•Replace the cassette at least once every 15 days when using the 3H - 168H modes. In the 240 - 960H modes, replace the cassette with a new one at the completion of recording.

Connection

Connect the input and output connectors on the rear panel correctly. Refer to “CONNECTIONS” on pages 14 to 16.

Menu switch settings Set menu switches as required. 5 ON SCREEN/F. DISPLAY MODE

	• Select the brightness and ON/OFF for each indication
	(date, time and recording speed, etc).
	During recording, the selected on-screen data is
	recorded together with video signals.
	If you do not want to display or record a specific item,
	set it to “OFF”.
	• <REC TALLY> setting
	Set whether or not the [REC] indicator lights in the
	Record mode.
5	VTR MODE
	• HDR
	Set to “ON” to record in the High-Density Recording
	mode during timelapse recording.
	• POWER ON REC
	Set to “ON” for external timer recording or automatic
	restart of recording after a power failure. For details,
	refer to “6-9 How to Restore Recording After Power
	Failure” and “6-10 External Timer Recording” on page
	45.
	• AUTO REW
	Select the mode engaged when the tape ends.
	“OFF”: The Stop mode is engaged.
	“ON”: The tape automatically rewinds to the
	beginning.
	When the <REPEAT REC> menu switch is set to “ON”,
	repeat recording takes place regardless of the setting
	of this switch.
	• REPEAT REC
	Set to “ON” to perform repeat recording. For details,
	refer to “6-7 Repeat Recording” on page 43.
	• AUTO REC CHECK
	Set to “ON” to perform Recording Check automatically
	at the beginning of a tape in the Repeat Recording
	mode.

[TIME MODE +/–] buttons 5 SRI/EXT MODE

•SRI/EXT REC

-Set to “SERIES” to perform series recording. For details, refer to “6-6 Series Recording” on page 41.

-Set to “EXT” to execute automatic recording when activated by an external signal.

For details, refer to “6-8 Recording with External VCR Activation Signal” on page 44.

5 ALARM/SENSOR MODE

•REC MODE

-For alarm recording, set to “ALARM” or “ALL”. For details, refer to 6-4 Alarm Recording” on page 38.

-For sensor recording, set to “SENSOR” or “ALL”. For details, refer to 6-5 Sensor Recording” on page 40.

5 BUZZER • TAPE END Set to “ON” if you want the buzzer to sound when the tape ends during recording.

5 IN/OUT

•CAMERA SW

Set the camera switching timing signal output to an external sequential switcher during recording.

-To switch cameras every 1 field or 1 frame, set this menu switch to “1 FIELD” or “2 FIELD”.

Front panel settings

5 Select the recording speed mode with the [TIME MODE +/–] button. For details, refer to “5-2 Recording/Playback Speed Mode Selection” on page 28.

5 Select the on-screen display position with the [ON SCREEN 7/f] button.

28 (E) 29