JVC LPT0641-001A manual Slow Motion On the Remote

Page 39

EN 39

Still Picture/Frame-By-Frame Playback (On the Remote)

1Pause during playback.

Press PAUSE (9).

2Activate frame-by-frame playback.

Press JOG/SHUTTLE so that the button lights up. Turn the JOG dial to the right for forward frame-by-frame playback, or to the left for reverse frame-by-frame playback.

OR

Press PAUSE (9) to advance a still picture.

OR

Press w for reverse frame-by-frame playback or e for forward frame-by-frame playback.

NOTE:

Still picture playback stops automatically after 3 minutes to protect the heads.

Slow Motion (On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion. Release to return to still picture.

OR

During still picture, press and hold PAUSE (9) for more than 2 seconds, then release. Press PAUSE (9) and release again to return to still picture.

OR

During still picture, press and hold w or e. Release to return to still picture.

NOTE:

Forward slow motion playback stops automatically after 1 minute, reverse slow motion playback after 30 seconds to protect the heads.

To resume normal playback, press PLAY (4).

You can also use the Remote's JOG dial/SHUTTLE ring for the operations. First press the JOG/SHUTTLE button on the Remote so that the button lights up before use. Refer to the SHUTTLE ring illustration below as you read the procedures.

Reverse

 

 

 

 

Forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reverse

 

Reverse

Slow

 

Forward

Reverse

slow

Normal

search

motion

search

play

motion

play

3 steps

1 step

3 steps

 

1 step

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

High-Speed (Turbo) Search (On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE ring resumes still picture playback.

OR

During playback or still, press FF (5) for forward high- speed search, or REW (3) for reverse high-speed search.

NOTE:

For short searches, press and hold FF (5) or REW (3) for over 2 seconds during playback or still picture. When released, normal playback resumes.

Variable Speed Search

(On the Remote)

Press JOG/SHUTTLE so that the button lights up. During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search.

OR

During playback, press w or e.

The more times you press, the faster the playback picture moves.

To decrease speed, press the button for the opposite direction.

To resume normal playback, press PLAY (4).

Image 39
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerImportant Product Safety Instructions Replacement Parts AccessoriesCleaning Damage Requiring ServiceContents Front View Rear View Front Display Panel Remote How To UsePress DISPLAY/OSD 10 ENON-SCREEN Display for VHS deck To recall an indicationON-SCREEN Display for DV deck Situate the VCR Check the contentsConnect the VCR to power source 12 ENVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectors14 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play SetLanguage Preparations Access the Clock Set screenClock Set 16 ENManual Clock Set Semiauto Clock SetAuto Channel Set Access the Tuner Set screenTuner Set 18 ENTo skip channels Manual Channel SetAdd or skip the desired channels To add channels20 EN Installing ControllerIf you do not use a cable box, press rt until OFF Access the Cable Box Set screenTurn on the cable box Select the cable box’s channelIf the cable box’s channel does not change to 22 ENEnter the cable box’s brand Press OK or eIf your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver If you do not use a DBS receiver, press rt until OFF Setting DBS receivers brand and channelTurn on the DBS receiver Select the DBS receiver’s channelIf the DBS receiver’s channel does not change as shown above Enter the DBS receiver’s brandBasic Playback 26 ENVHS deck Pause/Resume recording Choose a programSet the tape speed Start recordingActivate frame-by-frame playback 28 ENSlow Motion On the VCR Pause during playbackVariable Speed Search On the Remote Slow Motion On the RemoteNext Function Memory 30 ENIndex Search Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack SelectionInstant Timer Recording ITR 32 ENRecord One Program While Watching Another Set the counter display Reset the counterPress C.RESET before starting recording or playback Tape Remaining Time34 EN RetakeSecond Audio Recording Active Video Calibration PlaybackRecording Press DV 36 ENDV deck Select the DV deckDV recording indicator lights on the VCR 38 EN Slow Motion On the Remote 40 EN Time Code Select the deck Access the PlusCode No. screenAccess the VCR Plus+ Program screen 42 ENCable Box or DBS Receiver Users Engage the VCR’s timer modeFor the VHS deck For the DV deckEnter the Guide Channel number Access the Guide Channel Set screen44 EN Guide Channel Number SetEnter the receiving channel position number Guide Channel Number46 EN Express Timer ProgramingPress CH+ Enter the program dateEnter the channel position Press DATE+Set the program start/stop time and channel Enter the program mode24HR Quick Programing 48 ENPage Return to the timer mode Disengage the timer modeAccess the Program Check screen Cancel or change a programOverlapping programs blink on the TV screen Cancel or change program settingConfirm the overlapping programs Select the program to modifyDubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSPress DV, then press SP/LP p From VHS to DVPause dubbing 54 ENLocate the start point on the DV deck Prepare the VHS deck for dubbingPrepare the DV deck for dubbing Locate the start point on the VHS deck56 EN Player RecorderStart the recording deck Set the input mode of recording deck58 EN Start the source playerConnection to another VCR Connection to a PC with DV connectorExample When using this VCR as the source player PC with DV connectorDV Audio Dubbing Audio Dubbing60 EN VHS Audio DubbingEngage the Audio Dubbing mode End Audio DubbingPress A.DUB Source tape Insert Editing62 EN VHS Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassettePress R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screen64 EN Select the programEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingTo control two VCRs with the same Remote Remote A/B Code Switching66 EN Change the code for VCRBefore performing the following steps TV Multi-Brand Remote ControlSet the TV brand code Operate the TVOperate the Cable Box Press the corresponding button Power68 EN Set the Cable Box brand codeDBS Receiver Multi-Brand Remote Control Set the DBS receiver brand codeOperate the DBS receiver Select the mode setting Mode SetAccess the Mode Set screen Select the modeWhen this function is set to on Mode SET72 EN VHS Mode SETVHS Mode SET For Example 74 ENSound on the left Hi-Fi channel is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Normally select this. Hi-Fi sound is played back76 EN DV Mode SETPower Recording 78 ENDV deck VHS deck80 EN Timer RecordingTimer Recording PlaybackRecording 82 EN VCR Plus+ Timer Programing Cable box Cable Box Control SettingChanging VCR Plus+ Setting Express Timer Programming84 EN HOW to Locate Your JVC Service CenterWarranty Only in U.S.A 86 EN