JVC HR-DVS3EU specifications

Page 41

EN 41

NOTES:

You can programme each deck to timer-record as many as 6 programmes. If you try to programme the recorder to record a seventh, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 42).

It is not possible to timer-record a satellite broadcast received on the channel position “0” by the satellite receiver.

If “Err” appears on the front display panel, repeat the steps on page 40 again.

When a menu screen is shown, you cannot use 24 Hour Express Timer Programming function. Press MENU to return to normal screen, and try again.

You can use 24 Hour Express Timer Programming function also when the recorder is turned off.

For 24 Hour Express Timer Programming function, the programme overlap warning display does not appear even if some programmes overlap each other. The programme with the lower programme number will be recorded and the other one will not be recorded correctly.

It is not possible to timer-record the same programme on both the VHS deck and the DV deck simultaneously.

During timer recording, it is not possible to change the recording deck (VHS or DV).

If the times that are programmed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

You cannot use 24 Hour Express Timer Programming function if you select the DV deck and set the channel to “F-1”.

Image 41
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectorsAerial connector 12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rtto select your language code Press rtto select Auto and press OK or ePress rtto select CH - and press OK or e Perform Preset Download14 EN  pg , Just Clock Language for the on-screen displayJust Clock Access the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link VHS deck Basic Playback20 EN Set the tape speed Choose a programmeStart recording Pause/Resume recordingSlow Motion 22 ENPause during playback Activate frame-by-frame playbackVariable Speed Search High-Speed Turbo SearchIndex Search Skip SearchNext Function Memory 24 ENRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic tracking26 EN Instant Timer Recording ITRTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playbackReceiving Stereo and Bilingual Programmes 28 ENRetake Recording PlaybackDV deck 30 ENSelect the DV deck Press DVDV recording indicator turns off 32 EN During playback, turn the JOG dial quickly to the right For forward high-speed searchSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speed34 EN See Audio REC on Time Code36 EN Access the Showview displaySelect the deck Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeCheck the programme data Satellite Receiver Users38 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme mode40 EN Set the programme start/stop time and channelPage 42 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenFrom DV to VHS Dubbing An Entire Cassette Tape Dubbing44 EN Press DV, then press SP/LP p Dubbing direction indicator VHS lightsFrom VHS to DV Dubbing An Entire Cassette From DV to VHS 46 ENFrom VHS to DV VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Prepare the DV deck for dubbing48 EN Player If the camcorder has no S-VIDEO output connectorRecorder Video input 50 EN Another Video RecorderPlayer Recorder RecorderAnother recorder Press rt to move Output/Input SetVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connector54 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Insert Editing DV Insert Editing SP mode only56 EN VHS Insert EditingAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing58 EN Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassettePrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control code60 EN Display the codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TV62 EN Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Operate the satellite receiverDigital printer About DV IN/OUT connectorTo DV in connector Pin Scart connector Mains outlet Aerial ConnectorAerialSimple Connections Outdoor unit Satellite cablePerfect Connections Aerial connector Outdoor unit Satellite cablePin Scart Decoder66 EN Select the input modeConnect the decoder Set the tunerFM tuner CD player Stereo amplifier Make connectionsAUX in or Tape Monitor Speaker TelevisionAccess the Mode Set screen Mode SetSelect the mode Select the mode settingDefault setting is bold in the table below Powered back onScreen. Messages appear in the selected language  pg Control, or press 7 on the recorder70 EN VHS Mode SET 72 EN To record PAL signals, or play back a PAL or Ntsc tapeTo record Secam signals, or play back a Mesecam tape Original recorded sound Enables Audio Dubbing laterAudio-dubbed sound Full SOUNDOriginal recorded sound and Audio-dubbed soundTuner Set Access the Auto Channel Set screen74 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice TV screen moves fromManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 78 ENSet Stations a RTBF1 or TV Station And ID List80 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation82 EN Showview System SetupGuide Program Number Set Guide Program NumberConnect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder once and connect 86 ENNot connected between TV Turn off the recorder or the connectedPlayback Scan system 88 ENLines VHS Lines S-VHS Frequency range Hz to 10,000 Hz to 20,000 Hz Hi-Fi audio Maximum recording timeConnecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming Preset Download Random Assemble Editing90 EN Page Country code Example Francais 03 is selected for BelgiumInternational telephone Language code
Related manuals
Manual 92 pages 5.68 Kb