JVC HR-DVS3EU specifications Confirm the overlapping programmes, Select the programme to modify

Page 43

EN 43

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
	3
2

ATTENTION

If the programme you have just made and “DV” are blinking, there is a conflicting programme on the DV deck.

A Press rtto move the highlight bar to “DV”, then press OK or e.

DV Programme Check screen appears.

B Cancel or change programme setting as described in step 2 and 3 in the right column.

When programmes overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.

Example: Programme 1 (you have just made) and Programme 4 overlap each other on the VHS deck.

A Confirm the overlapping programmes.

Overlapping programmes blink on the TV screen.

B Select the programme to modify.

Press rt, then press OK or e.

●You can only select one of the overlapping programmes.

NOTE:

If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the recorder will return to the normal screen.

C Cancel or change programme setting.

To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

To change a programme, press the appropriate button: START+/–, STOP+/–, DATE+/–, PR+/–, VPS/PDC and/or SP/LP (p) when the Programme screen on which you want to make changes is shown, then press OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

NOTE:

If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.

Image 43

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderAerial connector To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection Select your country Auto Set Up12 EN Turn on the recorderPress rtto select Auto and press OK or e Perform Auto Set UpSelect the language Press rtto select your language code14 EN Perform Preset DownloadPress rtto select CH - and press OK or e Just Clock Language for the on-screen display pg , Just Clock 16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackVHS deck Pause/Resume recording Choose a programmeSet the tape speed Start recordingActivate frame-by-frame playback 22 ENSlow Motion Pause during playbackSkip Search High-Speed Turbo SearchVariable Speed Search Index SearchActivate Repeat Playback 24 ENNext Function Memory Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection26 EN Instant Timer Recording ITRPress 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter displayRetake 28 ENReceiving Stereo and Bilingual Programmes Recording PlaybackPress DV 30 ENDV deck Select the DV deckDV recording indicator turns off 32 EN During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed search34 EN See Audio REC on Time CodeEnter the Showview number Access the Showview display36 EN Select the deckSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Check the programme data38 EN Express Timer ProgrammingEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the programme dateSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 40 ENPage 42 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify44 EN Tape DubbingFrom DV to VHS Dubbing An Entire Cassette From VHS to DV Dubbing An Entire Cassette Dubbing direction indicator VHS lightsPress DV, then press SP/LP p From DV to VHS 46 ENPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deck48 EN Recorder Video input If the camcorder has no S-VIDEO output connectorPlayer 50 EN Another Video RecorderAnother recorder RecorderPlayer Recorder Press rt to move Output/Input SetSelect the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connectorDV Audio Dubbing Audio Dubbing54 EN VHS Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB VHS Insert Editing DV Insert Editing SP mode onlyInsert Editing 56 ENStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteInsert a VHS or S-VHS cassette and a Mini DV cassette Access the R.A.Edit screen58 EN Select the programmeEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingDisplay the code Change the remote control codeSet the remote control code 60 ENOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeOperate the satellite receiver Satellite Receiver Multi-Brand Remote Control62 EN Set the satellite receiver brand codeTo DV in connector About DV IN/OUT connectorDigital printer Outdoor unit Satellite cable Aerial ConnectorAerialPin Scart connector Mains outlet Simple ConnectionsDecoder Aerial connector Outdoor unit Satellite cablePerfect Connections Pin ScartSet the tuner Select the input mode66 EN Connect the decoderSpeaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape MonitorSelect the mode setting Mode SetAccess the Mode Set screen Select the modeControl, or press 7 on the recorder Powered back onDefault setting is bold in the table below Screen. Messages appear in the selected language pg70 EN VHS Mode SET To record Secam signals, or play back a Mesecam tape To record PAL signals, or play back a PAL or Ntsc tape72 EN Full SOUNDOriginal recorded sound and Audio-dubbed sound Enables Audio Dubbing laterOriginal recorded sound Audio-dubbed soundAuto Channel Set Access the Auto Channel Set screenTuner Set 74 ENTV screen moves from Perform Auto Channel SetView the Confirmation screen Press OK twiceManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 78 ENSet Stations B RTBF1 or TV Station And ID ListClock Set Access the Clock Set screen80 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock dataGuide Program Number Showview System Setup82 EN Guide Program Number SetConnect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder or the connected 86 ENTurn off the recorder once and connect Not connected between TVPlayback Hz to 20,000 Hz Hi-Fi audio Maximum recording time 88 ENScan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Preset Download Random Assemble Editing Auto Channel Set Auto Set UpConnecting To a Printer Express Timer Programming90 EN Page International telephone Language code Example Francais 03 is selected for BelgiumCountry code

Related manuals

Manual 92 pages 5.68 Kb