JVC HR-DVS3EU From VHS to DV Dubbing An Entire Cassette, Press DV, then press SP/LP p

EN 45

Tape Dubbing

(from VHS to DV)

1 3 2

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

Dubbing An Entire Cassette

Because this recorder includes both VHS deck and DV deck, you can easily use it for dubbing without connecting any other equipment.

A Load cassettes.

For the VHS deck

Insert a VHS (or S-VHS) cassette with the record safety tab removed.

For the DV deck

Insert a Mini DV cassette with the erase protection switch set to “REC”.

B Select the dubbing direction.

Press .

●The dubbing direction indicator ( VHS) lights.

C Set the tape speed.

Press DV, then press SP/LP (p).

●“DV } VHS” appears on the TV screen if “O.S.D.” is set to “ON”. ( pg. 69)

D Start dubbing.

Press DUB for more than two seconds.

●VHS playback indicator and DV recording indicator light.

●If the tapes have not been rewound, both decks rewind automatically. The DVdeck goes into Record Pause mode, and the VHS deck goes into Pause mode.

When both decks have finished rewinding, dubbing begins automatically.

After dubbing is completed, the decks rewind both tapes automatically and eject them. The recorder then shuts off.

NOTES:

●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. It is recommended to conduct a test with unimportant cassettes first.

●It is impossible to view a satellite broadcast or a scrambled broadcast when the recorder is in the dubbing mode.

●If you start dubbing a tape from a tape with a copy protection signal, the tapes will be automatically ejected, and the recorder will turn off.

●To cancel the dubbing mode, press PR +/– so that the dubbing direction indicator ( VHS) goes off.