JVC HR-DVS3EU specifications No power is supplied to the recorder, Connect the mains power cord

Page 83

TROUBLESHOOTING

EN 83

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	No power is supplied to the recorder.	● The mains power cord is disconnected.	Connect the mains power cord.

2.	The clock is functioning properly, but	● “#” is displayed on the front display	Press the # button to turn the “#”
	the recorder cannot be powered.	panel with “AUTO TIMER” set to “OFF”.	indicator off.

3.	The remote control won’t function.	● The batteries are discharged.	Replace the dead batteries with new ones.

TAPE TRANSPORT

	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	The tape does not run during	● “i” is displayed on the front display	Press 4 to turn the “i” indicator off.
	recording.	panel.

2.	The tape will not rewind or fast-	● The tape is already fully rewound or	Check the cassette.
	forward.	fast-forwarded.

PLAYBACK

	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	The playback picture does not appear	● The TV receiver is not set to the AV	Set the TV to its AV mode.
	while the tape is running.	mode.

2.	Noise appears during visual search.	● This is normal.

3.	Noise appears during normal	● The automatic tracking mode is	Try manual tracking. ( pg. 25)
	playback. (VHS deck only)	engaged.

4.	The playback picture is blurred or	● The video heads may be dirty.	For the VHS deck
	interrupted while TV broadcasts are		Use a dry cleaning cassette TCL-2, or
	clear or “USE CLEANING CASSETTE”		consult your JVC dealer.
	message appears on the screen.		For the DV deck
			Use a dry cleaning cassette M-DV12CL, or
			consult your JVC dealer.

5.	Breaks are noticeable in Hi-Fi	● The automatic tracking mode is	Try manual tracking. ( pg. 25)
	soundtrack. (VHS deck only)	engaged.

Image 83

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectorsAerial connector Select your country Auto Set Up12 EN Turn on the recorderPress rtto select Auto and press OK or e Perform Auto Set UpSelect the language Press rtto select your language codePress rtto select CH - and press OK or e Perform Preset Download14 EN pg , Just Clock Language for the on-screen displayJust Clock 16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link VHS deck Basic Playback20 EN Pause/Resume recording Choose a programmeSet the tape speed Start recordingActivate frame-by-frame playback 22 ENSlow Motion Pause during playbackSkip Search High-Speed Turbo SearchVariable Speed Search Index SearchActivate Repeat Playback 24 ENNext Function Memory Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection26 EN Instant Timer Recording ITRPress 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter displayReceiving Stereo and Bilingual Programmes 28 ENRetake Recording PlaybackPress DV 30 ENDV deck Select the DV deckDV recording indicator turns off 32 EN During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed search34 EN See Audio REC on Time CodeEnter the Showview number Access the Showview display36 EN Select the deckSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Check the programme data38 EN Express Timer ProgrammingEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the programme dateSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 40 ENPage 42 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyFrom DV to VHS Dubbing An Entire Cassette Tape Dubbing44 EN Press DV, then press SP/LP p Dubbing direction indicator VHS lightsFrom VHS to DV Dubbing An Entire Cassette From DV to VHS 46 ENPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deck48 EN Player If the camcorder has no S-VIDEO output connectorRecorder Video input 50 EN Another Video RecorderPlayer Recorder RecorderAnother recorder Press rt to move Output/Input SetSelect the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connectorDV Audio Dubbing Audio Dubbing54 EN VHS Audio DubbingPress A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing VHS Insert Editing DV Insert Editing SP mode onlyInsert Editing 56 ENStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteInsert a VHS or S-VHS cassette and a Mini DV cassette Access the R.A.Edit screen58 EN Select the programmeEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingDisplay the code Change the remote control codeSet the remote control code 60 ENOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeOperate the satellite receiver Satellite Receiver Multi-Brand Remote Control62 EN Set the satellite receiver brand codeDigital printer About DV IN/OUT connectorTo DV in connector Outdoor unit Satellite cable Aerial ConnectorAerialPin Scart connector Mains outlet Simple ConnectionsDecoder Aerial connector Outdoor unit Satellite cablePerfect Connections Pin ScartSet the tuner Select the input mode66 EN Connect the decoderSpeaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape MonitorSelect the mode setting Mode SetAccess the Mode Set screen Select the modeControl, or press 7 on the recorder Powered back onDefault setting is bold in the table below Screen. Messages appear in the selected language pg70 EN VHS Mode SET 72 EN To record PAL signals, or play back a PAL or Ntsc tapeTo record Secam signals, or play back a Mesecam tape Full SOUNDOriginal recorded sound and Audio-dubbed sound Enables Audio Dubbing laterOriginal recorded sound Audio-dubbed soundAuto Channel Set Access the Auto Channel Set screenTuner Set 74 ENTV screen moves from Perform Auto Channel SetView the Confirmation screen Press OK twiceManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 78 ENSet Stations a RTBF1 or TV Station And ID List80 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock dataGuide Program Number Showview System Setup82 EN Guide Program Number SetConnect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder or the connected 86 ENTurn off the recorder once and connect Not connected between TVPlayback Hz to 20,000 Hz Hi-Fi audio Maximum recording time 88 ENScan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Preset Download Random Assemble Editing Auto Channel Set Auto Set UpConnecting To a Printer Express Timer Programming90 EN Page Country code Example Francais 03 is selected for BelgiumInternational telephone Language code

Related manuals

Manual 92 pages 5.68 Kb