Activate 3R Picture, Activate Index Search, Memory

JVC HR-DD845EK Activate 3R Picture, Activate Index Search, Activate Instant Review, Memory

3R Picture

3R(= Resolution and Response Recovery technology) maximises sense of resolution and sharpens image edges to make playback picture look better focused.

1		ACTIVATE 3R PICTURE
		Press 3R PICTURE. The button will light.

		● To turn off 3R Picture, press 3R PICTURE again so
		that the light goes off.
		● Normally it is recommendable to keep 3R Picture ON
		(with the button lit).
		● Depending on the type of tape used, picture quality
		may be better with 3R Picture set to off.
		● If you use this recorder as the player for editing, be
		sure to turn off 3R Picture before starting.
		● The setting will remain effective even though you
		turn on/off the recorder.

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press PUSH JOG Þ or %(ª or £). “ª1” or “£1” is displayed on screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press PUSH JOG

Þ or %repeatedly until the correct index number is displayed.

Ex.: To locate the beginning of B from the current position, press PUSH JOG Þtwice.

To locate the beginning of D from the current position, press PUSH JOG %once.

Current position

–2

–1

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

Counter Memory

Returns to the counter reading of “0:00:00” to conveniently find a specific place on the tape automatically.

1	SET COUNTER MEMORY
	Press C. (COUNTER) RESET during playback at a point
	you wish to locate later. The counter reads “0:00:00”.
	Then press C.MEMORY, and “M” appears in front of the
	counter digits.

		ACTIVATE COUNTER
	2	MEMORY
		When you wish to return to the designated point, press
		STOP and then REW or FF.
		● The tape rewinds or fast-forwards and stops at about
		● The tape rewinds or fast-forwards and stops at about
		0:00:00 automatically.
		● To cancel Counter Memory, press C.MEMORY again.

3R Picture