JVC HR-DD845EK setup guide Auto Set Up, Perform Auto SET UP

8INITIALSETTINGS(cont.)

Auto Set Up

Auto Channel Set/Auto

Clock Set/Auto Guide

Program Number Set

1

q

TV PROG+/–

The Auto Set Up function sets the tuner channels, clock and Video Plus+ assigned Guide Program numbers automatically

when the button on the recorder/remote is first pressed to

power on the recorder after you plug the mains power cord into a mains outlet.

Before starting the following procedure, make sure that the TV aerial cable is connected to the recorder and that the recorder's mains power cord is connected to a mains outlet (☞ pg.4).

1	PERFORM AUTO SET UP
	Press	on the recorder or remote control.
	"Auto" appears on the display panel and blinks; do
	NOT press any button on the recorder or remote
	control until the display panel shows the current
	time or "CH1" or "--:--". (Refer to box on page 9.)
	Auto Set Up usually takes about 4 – 12 minutes;
	the duration differs by the area.
	● Auto channel set function takes place first; it assigns
	automatically all receivable stations in your area.
	● Auto clock set function sets the clock automatically.
	● During auto channel set, the recorder recognizes each
	station name of the detected stations and stores them
	in the recorder's memory, then automatically sets
	Video Plus+ assigned Guide Program number for
	those stations according to the broadcast area.

1

2

1 2 3

4 5 6

7 8 9

0 4

TV PROG+/–

NOTES:

●If the TV power is on and its VIDEO channel or AV mode

is selected during Auto Set					AUTO SET
Up, the AUTO SET screen					PLEASE WAIT
will appear. As Auto Set Up
progresses, the "		" mark on			+	+	+
the screen moves from left				0
to right.
● If there is a power cut, or if				[MENU] : EXIT
you press	or MENU
while Auto Set Up is in
			Beginning				End
progress, Auto Set Up will

be interrupted; be sure to turn off the recorder power once and

press to turn the power back on to re-start Auto Set Up.

ATTENTION

Once you have performed Auto Set Up, even if the recorder's memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder's memory and the recorder will not perform Auto Set Up again. You only need to set the clock. (☞ pg. 48)

If you have moved to a different area, perform each setting as required.

●Tuner setting ☞ pg. 40

●Clock setting ☞ pg. 48

●Video Plus+ Guide Program number setting ☞ pg. 10

If a new station starts broadcasting in your area, perform both tuner setting (☞ pg. 40) and Video Plus+ Guide Program number setting (☞ pg. 10).