JVC HR-DD840KR manual Troubleshooting E N, Cassette gets stuck partway

Page 57

TROUBLESHOOTINGEN57

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair.

POWER

	SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
1.	The power won’t come on.		● The power cord is disconnected.		Connect the power cord.

2.	The clock works, but the VCR’s		● The TIMER mode is engaged with		Press TIMER to disengage.
	power won’t come on.		Auto Timer set to "OFF" (☞ pg. 45).

3.	The remote control won’t function.		● The batteries are discharged.		Replace the dead batteries with new ones.
			● The A/B CODE switch is in the		Re-perform the A/B Code setting
			wrong position.		(☞ pg. 56).
			● The TV/CABLE/VCR switch is in the		Set the switch to the position
			wrong position.		corresponding with the unit you want
					to operate.

TAPE TRANSPORT
	SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
1.	The cassette gets stuck partway		● The cassette was inserted incorrectly.		Make sure the window side is up, the
	during loading, and is ejected.				rear label side is facing you and the
					arrow on the front of the cassette is
					pointing towards the VCR. Then insert
					the cassette

2.	The tape stops during rewind or		● The Counter Memory indicator		Press C.MEMORY to disengage the
	fast forward.		(“M”) is lit on the front display		Counter Memory mode and extin-
			panel.		guish the indicator (☞ pg. 29).

PLAYBACK

	SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
1.	The tape is running but the picture		● If you’re using the RF OUT connec-		Set the channel selector to channel 3
	won’t appear.		tion (☞ pg. 4), the channel selector		or 4.
			on the TV is set incorrectly.		Set the TV receiver to its AV mode.
			● If you’re using the AV connection		Set the TV receiver to its AV mode.
			(☞ pg. 4), the TV receiver is set to
			the wrong mode.

2.	Breaks are noticeable in Hi-Fi		● Automatic tracking is engaged.		Engage and adjust tracking manually
	soundtrack.				(☞ pg. 24).

3.	The playback picture is blurred or		● The video heads may be dirty.		The heads must be cleaned. Consult
	interrupted, even though TV				your JVC dealer.
	broadcasts are clear.

4.	The Hi-Fi soundtrack cannot be		● The AUDIO MONITOR option at		Set AUDIO MONITOR to "HI-FI"
	heard.		the Audio Select screen was set		(☞ pg. 27).
			incorrectly.

					CONTINUED ON NEXT PAGE.

Image 57

Contents HR-DD840KR Do not place the VCR Dear CustomerContents Basic Connections Initial Settings Plug & Play SetupPlug & Play Auto Clock Set/Auto Tuner SetLanguage Clock Select ScreenPreparation Access Select Screens Select ModeSelect Host Channel Semi-AutoSelect Time Zone Select D.S.T. ModeSET DATE, Time and D.S.T Make CorrectionsAccess Tuner SET Access Main MenuTuner SETInformation Access AFC Screen Access Tuner SET ScreenMake Selection Store or Skip Desired ChannelSituate Controller Cable Box ControlAttach Controller Connect Cable BOX to VCRAccess G-CODE SET-UP Screen Access Custom SET ScreenSelect Cable BOX Output Channel Return to G-CODE SET-UP ScreenYou can now set up the G-CODEfeature pg Access Cable BOXTurn on Cable BOX Brand SET ScreenChannel Number Matching CODESetupAccess Custom SET Screen Input Receiving Channel Number Check Input DataInput Guide Channel Number DBS Receiver Control Connect DBS Receiver to VCRDBS receiver Set DBS Receiver Output Channel Return to Custom SET ScreenEnter DBS Receiver Brand Turn on DBS ReceiverSet DBS Receiver Brand DBS Receiver Brand SET, then press OKLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Pause During Playback Playback FeaturesActivate FRAME-BY Frame Playback PlaybackAdjust Manual Tracking Engage Manual Tracking ModeLayback and Recording Features RE-ENGAGE Automatic TrackingStabilizer Activate VideoReturn to Normal Video StabilizerAccess Function SET Access SuperimposeSuperimpose Access Audio Monitor Access Audio SelectSelect The Soundtrack MixStart Search Access Distant CodeIndex Search Instant ReViewStop Repeat Start RepeatActivate Counter MemoryMake Connection Access SpecialFunction Screen AV Compu Link PlaybackEnable AV Compu Link Playback Perform AV Compu Link PlaybackExample Auto Picture Playback Press Play VCR adjusts Playback picture qualityBased on the quality Tape in useVariable-Speed Search/ Reverse Motion Playback TimeScanTimeScan Skip Over Unwanted SectionsSkip Search Speed Audio outputAccess Function SET Screen Access Main Menu ScreenAccess Audio Select Screen TimeScan AudioEngage TV Mode Recording FeaturesReset Counter to Zero Select Channel for ViewingStereo And SAP Second Audio Program Access 2ND AudioTo Record SAP Programs To Record Stereo ProgramsOr Push JOG , then press OK Hi-Fi Audio Recording Level ControlBar arrow to HI-FI REC LEVEL, then press OK Arrow to Manual by Pressing CH 5 or PushAccess G-CODE Screen CODETimer ProgrammingEN Timer Recording Enter G-CODE NumberEngage Timer Mode CHECK/CORRECT InputData Access Program SET TimerOn-Screen ProgrammingPush JOG, Cancel and Menu SET ProgramInformation RE-ENGAGE Timer Cancel a ProgramTimer Recording Check And Cancel ProgramsAuto Timer Access Auto TimerEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press REC on the front panelEdit To Or From Another Mode Edit From a CamcorderIf you are connecting AV cable to the AV Access AUX Input ScreenSet the camcorder to its play mode Set your VCR to its record modeReset the Counter SET Input ModeLocate END Point Locate Start PointEngage Insert Editing Start EditingEND Insert Editing Engage Audio Dubbing Audio Dubbing recorderStart Dubbing END Audio DubbingSpecial Features SET Remote Control ModeTurn on the TV SET TV Brand Code Turn on the Cable BOX Cable Box Multi-Brand Remote Control Enter Cable BOX Brand Operate Cable BOXTurn on the DBS SET Remote ControlReceiver Enter DBS ReceiverSET A/B Code Switch Unplug Vcrs PowerPlug in Power Cord Turn VCR Power onCassette gets stuck partway Troubleshooting E NOubleshooting Timer againRe-perform the G-CODEsetup Doesn’t work properly When scanning channels, someResume recording Remote control won’t operate Playback EN Questions and AnswersIndex MBR Multi-Brand Remote Code SettingList Of Terms Select DBS Receiver Output ChannelFront View EN IndexRear View Remote Control Provided Installing BatteriesHow To Use EIA monochrome signal SpecificationsChannel 3 or 4 switchable 20C to 60C -4F to140FEMO Memo HR-DD840KR