JVC HR-DD445EK setup guide Basic Recording

18

Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

RECORDING

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1	LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
	● The counter is reset to 0:00:00 and the recorder
	power comes on automatically.
	CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
2 preset you wish to record.

TV PROG

2

2

NUMBER

4 RECORD

	4	PLAY	5
1	CORD
		q
SP/LP		Á	1
3	PAUSE		STOP/EJECT
	5

6

1	2	3
4	35	6
7/	8	9
	0	4
2

TV PROG 2

1		3		PLAY 4,5
				Á
¦		7	8		PAUSE
1		4		¢	5
	STOP
3
6

		SET TAPE SPEED
		Press SP/LP ( ). Check the SP/LP indicator on the
		recorder display panel to confirm the selected tape
3 speed.
		● Picture quality of LP recordings will not be as high as
		SP recordings.
4		START RECORDING
		Press and hold RECORD and press PLAY on the remote
	control, or press RECORD on the recorder.
		B.E.S.T. takes place at the beginning of both the
		first SP and the first LP recording after inserting the
		cassette (☞ pg. 20).
		PAUSE/RESUME
		RECORDING
5 Press PAUSE. Press PLAY to resume recording.
		STOP RECORDING
		Press STOP on the remote control or STOP/EJECT on
		the recorder. Then press STOP/EJECT to remove the
6 cassette.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab