JVC HR-DD445EK setup guide Manual Channel Set

36TUNERSET(cont.)

Manual Channel Set

1 2 3

4 5 6

NUMBER

7/	8	9
	0	4
2
1	3	Á
¦	7	8
1	4	¢
MENU		PUSH JOG
3
OK

ATTENTION

After you have stored channels manually, be sure to perform Guide Program Number Set (☞ pg. 10) in order to get proper results from Video Plus+ timer recording.

Storing Channels Manually

Store channels that were not stored during Auto Set Up (☞ pg. 8) or Auto Channel Set (☞ pg. 34).

1		ACCESS MAIN MENU
		Press MENU twice.
		ACCESS CONFIRMATION
2		SCREEN
		Press PUSH JOG%Þ to move the highlight bar (pointer)
		to “MANUAL CH SET”, then press OK. The Confirma-
		tion screen appears.
3		SELECT POSITION
		Press PUSH JOG %%until an open position in
	%Þ
	which you want to store a channel begins blinking,
	then press OK. The Manual Ch. Set screen appears.
4		INPUT CHANNEL
		The number "21" appears		MANUAL CH SET
		blinking to the right of		PR	CH
		"CH". Press the NUMBER
		keys to input the channel
				01	CH21
		number you want to store.
		● For fine tuning adjust-
			[5°]/ [0-9] : SELECT
		ment, press PUSH JOG%	[55] : CURSOR ↔
		until the channel	: OK
			[MENU] : EXIT
		number begins blinking,
		then press PUSH JOG%Þ. While tuning, “F+” or “F–
		” appears.
		ENTER NEW CHANNEL
5		INFORMATION
		Press OK and the Confirmation screen appears.
		● Repeat steps 3 through 5 as necessary.
		CLOSE CONFIRMATION
6		SCREEN
		Press MENU.
		● To input the station name, see page 38.
		● To change positions, see "Change Station Preset
		Position" (☞ pg. 37).