JVC HR-DD445EK setup guide SET Clock, SET Date and Time, SET Just Clock, Preset

1 2 3

4 5 6

7/ 8 9

0 4

2

1 3 Á

¦ 7 8

1 4 ¢

MENU	PUSH JOG
	3
OK

43

Auto Clock Set

	SET CLOCK
4	AUTOMATICALLY
	At the Clock Set screen,
	press PUSH JOG%. The	AUTO CLOCK
	Auto Clock Set screen
	appears and clock setting	PLEASE	WAIT
	begins.	JUST CLOCK: ON
	● If "TV PR." isn't set to the	TV PR.	: 1
	preset position on which
	Auto Clock Set data is
	received, "ERROR"
	appears, and then the screen from step 3 reappears.
	To set "TV PR.", press OK to place the cursor next to
	it, then cycle through the numbers by pressing PUSH
	JOG%Þuntil the number representing the position in
	which the station transmitting clock setting data
	(BBC1, BBC2, etc.) is stored appears.
	RETURN TO NORMAL
5	SCREEN
	Once clock setting is completed, press MENU to return
	to the normal screen.

NOTES:

●Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when . . .

–the recorder’s power is on (unless the recorder is tuned to the same preset selected in the Clock Set screen).

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Auto clock setting and Just Clock may not function properly depending on the reception condition.

●During Manual clock setting, if the day and month data are invalid (such as 31st April), the month digits are cleared automatically and the day digits begin blinking. Input the correct data.

●If, in step 4 of the Manual clock setting procedure, the year digits are automatically cleared and the day digits begin blinking, it is possible that you have input 29th February for a non-leap year. Input the correct data.

Manual Clock Set

4	SET DATE AND TIME
	Press PUSH JOG%Þ to set the hour, then press OK.
	The “minutes” display begins blinking. Repeat the
	procedure to set the minutes, day, month and year.
5	SET JUST CLOCK
	The default setting is “ON”. Set as desired by pressing
	PUSH JOG%Þ, then press OK.
	● If you set to “OFF”, you can disregard the next step as
	you won’t be able to receive regular clock adjust-
	ments.
	SET CLOCK DATA SOURCE
6	PRESET
	The recorder is preset to receive clock setting and
	adjustment data from preset position 1. Press PUSH
	JOG%Þto set the preset position to the number
	representing the station transmitting clock setting data
	(BBC1, BBC2, etc.), then press OK.
7	START CLOCK OPERATION
	Press MENU.