JVC HR-DD445EK setup guide Regular Timer Programming, Start Time

24TIMERRECORDING(cont.)

Regular Timer

Programming

Remember, the clock must be set before you can progamme the timer (☞ pg. 42).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

1	2	3
4	5	6		4
7/	8	9
			STOP+/	–
	0
			4
2

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

ACCESS TIMER PROGRAMMING SCREEN

1 Press PROG
ACCESS PROGRAMME
SCREEN
Press START +/–. (If you’re	– P1 –
just starting out, “P1”
	START		STOP
2 appears.)
	–:– – =		–:– –
	SP			OFF
	DATE	TV PROG
	25.12			– –
	[+/–] =
	[MENU] : EXIT

The front display panel looks like this:

SP

ENTER PROGRAMME

START TIME

START+/–

2,3	1	3
	¦	7
	1	4

1 PROG

3

8

Á	5
DATE+/
–

¢

	Press START +/– to enter				– P1 –
	the time you want			START			STOP
3 recording to start.
				21:00	=		–:– –
	● Press and hold START			SP				OFF
	+/– to move in 30-			DATE		TV PROG
	minute increments, or
			25.12					– –
	press and release
		[+/–] =
	repeatedly to move 1
		[MENU] : EXIT
	minute at a time.

The front display panel looks like this:

PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over advertised times you preset in the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.

NOTES:

●Set the start time (PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

●PDC Recording is also possible when a satellite receiver or a cable system is connected to AV2 IN on your recorder.

●PDC recording is also possible via the AV1 IN/OUT connector.

SP

	ENTER PROGRAMME STOP
	TIME
	Press STOP +/– to enter the time you want recording to
4 stop.
5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)