JVC HR-DD857MS EN13, Override Automatic Tracking, Adjust Tracking Manually, ACTIVATE 3R PICTURE

3R PICTURE

EN13

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.

1 2

4 5

7	8	SP/LP/EP
	0

PLAY 1

3

STOP

3

2

6

9

4

TV PROG

PUSH JOG

OVERRIDE AUTOMATIC

TRACKING

1 Press (SP/LP/EP) on the remote to engage manual tracking.

ADJUST TRACKING

MANUALLY

2 Press TV PROG + or – to adjust tracking.

RETURN TO AUTOMATIC TRACKING

3 Press (SP/LP/EP) on the remote to re-engage automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Repeat Playback

Your video recorder can automatically play back the whole tape 50 times repeatedly.

3R Picture

3R(= Resolution and Response Recovery technology) maximises sense of resolution and sharpens image edges to make playback picture look better focused.

1	ACTIVATE 3R PICTURE
	Press 3R PICTURE. The button will light.
	● To turn off 3R Picture, press 3R PICTURE again so
	that the light goes off.
	● Normally it is recommendable to keep 3R Picture ON
	(with the button lit).
	● Depending on the type of tape used, picture quality
	may be better with 3R Picture set to off.
	● If you use this recorder as the player for editing, be
	sure to turn off 3R Picture before starting.
	● The setting will remain effective even though you
	turn on/off the recorder.

1	START PLAYBACK
	Press PLAY.
	ACTIVATE REPEAT
2	PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
	● The Play indicator ( ) on the display panel blinks
	slowly.
	● The tape plays 50 times automatically, and then
	stops.
3	STOP PLAYBACK
	Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.