V
VCR TV/VCR
EN33
TV Multi-brand Remote
Control
Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.
Before you start . . .
● Turn on the TV using its remote control.
1 2
4 5
7 8
CANCEL0
1
STOP
3
TV PROG+/–
3
2
6NUMBER
9
TIMER
4
OK
TV VOL+/–
1
2
SET TV BRAND CODE
Refer to the chart below. While holding down TV on the recorder's remote control, enter your TV’s brand code using the NUMBER keys, then press STOP.
Check if the TV's power goes off as it should. If it does, try other operations (☞ step 2)
●Once you have set the remote control to operate the TV, you don't have to repeat this step until you replace your remote control's battteries.
●SAMSUNG has two codes. If the TV does not function with one code, try entering another.
OPERATE TV
First, press TV to set the remote control to TV mode, then press the corresponding button: , TV PROG
TV/VCR, TV VOL +/– (Volume), (Muting), NUMBER keys.
●For some brands of TV, you must press OK after having pressed the NUMBER keys.
ATTENTION
The remote control can operate not only the video recorder but also some of your TV's functions.
●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.
●To operate your TV, first press the TV button to set the remote control to the TV mode.
Control Your TV Using Additional Buttons
Use the NUMBER keys, and the button, CANCEL button or TIMER button to select the TV’s channel.
●With televisions under Code 01, 02, 03, 05, 07, 15, 16,
22, 23, 26 or 27, the button corresponds to the 1-
●With televisions under Code 01, 08, 18, 19, 24 or 25, the CANCEL button corresponds to the 10 + button, and the TIMER button corresponds to the 20 + button of your TV’s remote control.
NOTE:
The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.
IMPORTANT
Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.
TV BRAND NAME | CODE |
JVC | 01 |
AIWA | 10 |
BEIJING | 05, 27 |
CHANGHONG | 05, 06, 16, 25 |
DAEWOO | 11 |
FERGUSON | 15 |
FINLUX | 20 |
FUNAI | 09 |
GRUNDIG | 17 |
HITACHI | 07 |
ITT | 18 |
JINXING | 23 |
KONKA | 26 |
LG/GOLDSTAR | 13 |
MITSUBISHI | 06 |
MIVER | 19 |
NEC | 22 |
NOBLEX | 27 |
NOKIA | 21 |
PANASONIC | 02 |
PEONY | 23,24,25 |
PHILICO | 07 |
PHILIPS | 16 |
SAMSUNG | 12, 16 |
SANYO | 08 |
SHARP | 04 |
SONY | 03 |
TCL | 16, 28 |
THOMSON | 14 |
TOSHIBA | 05 |