JVC HR-DD857MS specifications Set Video Channel, Finish Video Channel Set, With AV Connection

Page 5
SET VIDEO CHANNEL

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 4), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

●If Auto Set Up (☞ pg. 6) or Tuner Set (☞ pg. 42) has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

FINISH VIDEO CHANNEL SETWith AV ConnectionFINISH VIDEO CHANNELInstalling/Removing the lithium batteryManual backgroundManual backgroundManual backgroundManual backgroundENManual backgroundManual background5Manual background

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

 

Hold down STOP/EJECT on the recorder until the

1 display panel shows the following.

 

 

 

 

 

 

 

 

 

SET VIDEO CHANNEL

 

Press OK, then press TV PROG – until the display panel

2

shows the following.

 

 

 

 

 

 

 

 

 

 

 

 

Now the video channel is set to off (– –).

 

 

 

 

 

FINISH VIDEO CHANNEL

3

SET

Press OK.

 

 

 

● If Auto Set Up (☞ pg. 6) or Tuner Set (☞ pg. 42)

has not previously been performed, the Language

 

Select screen appears and Auto Set Up function

 

takes place automatically.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the VCR power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HR-DD857MS CONTENTSVIDEO CASSETTE RECORDER INSTRUCTIONSWARNING DANGEROUS VOLTAGE INSIDE Safety PrecautionsSAFETY FIRST INSTALLINGYOURNEWRECORDER CHECK CONTENTSBasic Connections4ENINITIALSETTINGS ACCESS VIDEO CHANNEL SET MODEVideo Channel Set SELECT TV SYSTEMFINISH VIDEO CHANNEL SET SET VIDEO CHANNELFINISH VIDEO CHANNEL With AV Connection6ENINITIALSETTINGScont Auto Set UpSELECT LANGUAGE SET TIMEOK PUSH JOG START AUTO CHANNEL SETENABLE/DISABLE ACCESS MAIN MENU8ENINITIALSETTINGScont ACCESS FUNCTION SETACCESS INITIAL SET SCREEN ACCESS MAIN MENU SCREENSelect Language MENU10ENINITIALSETTINGScont ACCESS CLOCK SET SCREENClock Set TURN THE RECORDER ONEN11 Basic PlaybackLOAD A CASSETTE POINT12EN Playback FeaturesACTIVATE HIGH-SPEED SEARCH PAUSE DURING PLAYBACKEN13 ADJUST TRACKING MANUALLYOVERRIDE AUTOMATIC TRACKING RETURN TO AUTOMATIC TRACKINGACTIVATE INSTANT REVIEW ACTIVATE INDEX SEARCH14ENPLAYBACK cont Index SearchEN15 Tape Position IndicatorACTIVATE SPATIALIZER SKIP OVER UNWANTED16EN TimeScanVariable-Speed Search ACTIVATE VARIABLE-SPEED SEARCHTimeScan Audio EN17TimeScan 18EN Basic RecordingCHOOSE A PROGRAMME SET TAPE SPEEDRESET COUNTER Recording FeaturesInstant Timer Recording ITR EN19RECORDINGcont 20ENReceiving Stereo And Bilingual Programmes To Record Stereo And Bilingual Programmes A2MAKE CONNECTIONS EN21CHOOSE FM BROADCAST SELECT TV PROGRAMMEACCESS FUNCTION SET ACCESS MAIN MENUB.E.S.T. Picture System SCREENRecording EN23Playback 2 Press PLAY to start recordingACCESS INITIAL SET G-CODE SetupACCESS G-CODE SET-UP 24ENTIMERRECORDINGENTER RECEIVING EN25CHANNEL POSITION NUMBERACCESS G-CODE SCREEN G-CODE Timer ProgrammingACCESS G-CODE 26ENTIMERRECORDINGcontEN27 TIMER MODEENGAGE RECORDER’S To Timer-Record Weekly Or Daily Serials28ENTIMERRECORDINGcont Express Timer ProgrammingACCESS PROGRAMME SCREEN ENTER PROGRAMME STOP TIMETo Timer-Record Weekly Or Daily Serials EN29ACCESS PROGRAMME DISENGAGE TIMER MODECANCEL OR REPLACE A PROGRAMME RETURN TO TIMER MODEAuto Timer Auto SP→LP TimerEN31 SELECT MODEREMOVE POWER SUPPLY Remote Control FunctionsSET REMOTE CONTROL CODE RE-SUPPLY POWERSET TV BRAND CODE TV Multi-brand Remote ControlOPERATE TV EN3334EN Edit To Or From Another Video RecorderINPUT MODE START SOURCE PLAYEREN35 Edit From A CamcorderSET RECORDER’S INPUT MODE START CAMCORDER36EN Audio DubbingSET INPUT MODE LOCATE START POINTSTART DUBBING EN37END AUDIO DUBBING the remote control to select + L+R+NORM pgInsert Editing RESET THE COUNTERLOCATE END POINT 38ENEDITINGcontEND INSERT EDITING START EDITINGENGAGE INSERT EDITING If you want to replace the picture, Hi-Fi audio soundtrack and40EN Setting Of The Colour System Select ButtonsINFORMATIONONMULTI-SYSTEMCOMPATIBILITY Off-Air RecordingWhen viewing NTSC tapes on a PAL TV set EN41Tape-To-Tape Editing 42EN ACCESS MAIN MENU SCREENTUNERSET Auto Channel SetACCESS CHANNEL LIST ACCESS TUNER SETEN43 SELECT POSITIONACCESS TUNER SET ACCESS CHANNEL LIST44ENTUNERSETcont Delete A ChannelTV System Selection - When you see the picture but hear no audio Fine-Tuning ChannelsPERFORM TUNING EN45POWER 46ENTROUBLESHOOTINGTAPE TRANSPORT PLAYBACKRECORDING TIMER RECORDINGTIMER again POSSIBLE CAUSEOTHER PROBLEMS TROUBLESHOOTINGcont48EN CORRECTIVE ACTIONQUESTIONSANDANSWERS EN49INDEX 50ENFRONT VIEW @ # $ %REAR VIEW EN51DISPLAY PANEL REVIEWINDEX cont REMOTE CONTROL52EN EN53 SPECIFICATIONSMEMO MEMO Printed in Malaysia 0798CKV*UN*PJ HR-DD857MS
Top Page Image Contents