JVC HR-DD857MS G-CODE Timer Programming, Access G-Code Screen, Enter G-Code Number, 1 2 3 4 5 6 7

26ENTIMERRECORDING(cont.)

G-CODETimer Programming

Before performing G-CODETimer Programming:

●Be sure to read "G-CODESetup" (☞ pg. 24).

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system by pressing the COLOUR SYSTEM button. (☞ pg. 40)

With G-CODE, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS G-CODE SCREEN

1	Press PROG..	G-CODE
		[0 – 9] =
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT
	ENTER G-CODE NUMBER
	Press the NUMBER keys to	G-CODE
	enter the G-CODEnumber
2 of a programme you wish		1 2 3 4 5 6 7 8
	to record.
	● If you make a mistake,	[0 – 9] =
	press CANCEL and input
		[CANCEL] : DELETE
	the correct number.	[PROG] : EXIT
	ACCESS G-CODE
	PROGRAM SCREEN

CANCEL

PROG.

1 2 3

4 5 6

7 8 9

0

1

2

4

NUMBER

Press OK, and the G-CODE	G-CODE	– P1 –
Program screen appears (if		123456789
3 you’re just starting out,	START	STOP
	21:00	= 22:00
“P1” appears).		SP
	DATE	TV PROG
	25.12	1
	: OK

IMPORTANT

Make sure the channel position number you wish

	SP/LP/EP
3	OK

to record is displayed; if not, see "G-CODESetup" on page 24 and set the Guide Program number for that G-CODEnumber correctly.

●If the number you entered is invalid, "ERROR" appears on the screen. Press CANCEL and input a valid G-CODEnumber.

●If the "G-CODE SET-UP" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 27.

SET TAPE SPEED

4 Press SP/LP/EP () to set the tape speed.