JVC HR-DD857MS EN15, Activate Spatializer, Skip Over Unwanted, Sections, Next Function Memory

Next Function Memory

You can set your recorder's power to go off automatically after the tape is fully rewound. Before starting, make sure the recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press within 2 seconds.

Tape Position Indicator

EN15

Spatializer®

This feature expands sound field when you play back any stereo source or view a stereo programme while recording it. *Spatializer® has no effect on recording quality.

ACTIVATE SPATIALIZER®

Press SPATIALIZER; the current setting will be displayed

1 on the screen for about 5 seconds. Pressing

The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
Search. The position of “5” in
relation to “0” (beginning) or		0	+
“+” (end) shows you where you
are on the tape.
”O.S.D.” (☞ pg. 8) must be
set to “ON”, or the indicator
	Beginning
will not appear.

3

+ +

1:23:45

End

SPATIALIZER while the screen shows the display
changes the setting.
● To view a stereo programme such as movies or
music, select "SPATIALIZER		" to create more
spacious sound.
● To view a monaural programme, select
"SPATIALIZER[ST" which simulates a stereo effect.
● Select "SPATIALIZER OFF" to turn off Spatializer® if
the sound becomes unnatural with either
"SPATIALIZER	" or "SPATIALIZER[ST" selected.
● If your TV is equipped with 3D-PHONIC and if you
	®

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

use both Spatializer and 3D-PHONIC at the same

time, the sound may become unnatural; set either

function to "OFF".

● The setting will remain effective even though you

turn on/off the recorder.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

NOTES:

●Spatializer®is effective only with a stereo TV.

●You can change the Spatializer® setting even though "O.S.D." is set to "OFF".

●The setting cannot be changed during search, still, frame-by- frame playback or slow motion mode.

●When this recorder is used as the player for editing, the recorded audio will correspond to the Spatializer® setting.

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK					USE
Recorder's Front Panel	On-Screen Display
L + R			HI FI		For Hi-Fi stereo tapes
	L			R
L	L		HI FI		For main audio of Bilingual tapes
R			HI FI		For sub audio of Bilingual tapes
				R
NORM		NORM			For audio-dubbed tapes
L + R + NORM			HI FI		For audio-dubbed tapes
		NORM

NOTES:

●"L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back automatically for tapes with only normal audio.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 8).