JVC BR-DV600UA manual Edit Adjust, Auto REW AT Timer, Back UP REC Timing, Controller Select

Page 13

4 MENU SWITCHES

q:

Factory setting

(00): The number in the bracket shows the set value

 

on the counter display.

312AUTO REW

Details: Selects whether or not the tape is rewound automatically at tape end during recording or playback.

Setting:

qOFF (00): The tape is not rewound automatically. ON (01): The tape is rewound automatically.

Repeat playback is available when No. 311 <AUTO PLAY> menu switch is set to “PLAY”.

353EDIT ADJUST

Details: When this unit is used with an editing controller and the edit-in point is shifted, this corrects the play start timing.

Switch setting differs depending on the configuration of the editing system. For details, refer to “Edit adjust setting” on page 17.

Setting:

q0F: No compensation.

1F: The playback start point is delayed by 1 frame.

2F: The playback start point is delayed by 2 frames.

3F: The playback start point is delayed by 3 frames to the factory set timing.

4F: The playback start point is delayed by 4 frames.

5F: The playback start point is delayed by 5 frames.

6F: The playback start point is delayed by 6 frames.

7F: The playback start point is delayed by 7 frames.

360AUTO REW AT TIMER

Details: Selects whether or not the tape is automatically rewound when the VCR power is switched ON in the Timer Play or Recording Standby mode.

Setting:

qOFF (00): Playback or recording starts immediately. The tape is not rewound.

ON (01): Playback or recording starts after the tape is rewound to the beginning.

362BACK UP REC TIMING

Details: For backup recording, set this according to the length of the recording on the tape in the source VCR.

For details, refer to “Backup recording function” on page 36.

Setting:

qOFF (00) : Backup recording is not performed. 25MIN (01) : When the length of the recording on

the tape in the source VCR. is 30 minutes.

55MIN (02) : When the length of the recording on the tape in the source VCR. is 60 minutes.

75MIN (03) : When the length of the recording on the tape in the source VCR. is 80 minutes.

363CONTROLLER SELECT

Details: Selects the setting according to the type of remote control unit connected via the RS-422A interface.

Setting:

qTYPE 1 (00) : For the RM-G820.

TYPE 2 (01) : For a non-linear editing system.

TYPE 3 (02) : For BR-S822 swap and BR-D92 swap.

TYPE 4 (03) : Unused.

:

TYPE 8 (07)

396BATTERY SELECT

Details: When using DC power, set this switch according to the DC power supply and battery type.

Setting:

q12 V (00): Select this setting to use a DC power supply (AA-G10) or DC 12 V flat shape type battery.

13.2V (01): Select this setting to use Anton Bauer

Inc.’s Trimpack 13, ProPac 13.

14.4V (02): Select this setting to use Anton Bauer Inc.’s Trimpack 14, ProPac 14 and IDX Corporation's NP-L46.

397FAN STOP SHUTDOWN

Details: Sets whether or not VCR operation continues if the fan motor stops.

Setting:

qENABLE (00): The power turns off about 1 minute after the fan motor stops. DISABLE (01): The VCR continues operation even after the fan motor stops. When the fan motor stops, press the [OPERATE] button as soon as possible to turn the VCR’s power off. If not, a malfunction may occur due to overheating.

399REMOTE FF/REW MODE

Contents: Selects the operation when FF/REW command is received by a REMOTE connector (with the exception of the serial remote connector) during playback.

Setting:

qFF/REW(00):

The mode becomes the FF/REW

 

mode when the command is

 

received. Normally, use this setting.

SEARCH (01): The mode becomes the SEARCH

 

mode when the command is

 

received. Use this setting when

 

CUE operation fails to work

 

normally when the “FF/REW”

 

setting is selected.

413TCG SOURCE

Details: Selects the time code to be recorded. Setting:

qINTERNAL (0): Uses the time code from the built-in generator. EXTERNAL (1): Uses the time code from the timecode generator connected to the [TIME CODE IN] connector.

4 MENU SWITCHES

q:

Factory setting

(00): The number in the bracket shows the set value

 

on the counter display.

414TCG SELECT

Details: Selects the time code generator mode. Setting:

qPRESET (00): Engages the Preset mode. REGEN (01): Engages the Regen mode.

415TCG MODE

Details: Selects the time code generator Run mode. Setting:

FREE RUN (00):Engages the Free Run mode. qREC RUN (01): Engages the Rec Run mode.

416NON DROP/DROP (U MDEL)

Details: Selects the time code generator Drop Frame mode.

Setting:

qDROP (00): Engages the Drop Frame mode. NON DROP (01): Engages the Non-Drop Frame

mode.

460TC DUPLICATE

Details: Selects the time code when the [DV IN] connector is used during recording.

Setting:

qOFF (0): Records the time code from the built-in or

external time code generator.

ON (1): Records the time code input to the [DV IN] connector.

500ON SCREEN

Details: Selects whether or not the on-screen display is shown on the monitor.

Setting:

OFF (00): The display is not shown. qON (01): The display is shown.

501CHARACTER H.POSITION

Details: Moves the display position of the tape counter on screen, etc. horizontally.

Setting:

q 0 (00) The display position can be moved in 9

:steps from 0 to 8. The factory setting is

8 (08) “0” (the display position at the far right). * The tape remaining time indication

position cannot be changed.

502CHARACTER V.POSITION

Details: Moves the display position of the tape counter on screen, etc. vertically.

Setting:

0 (00) The display position can be moved in

q1 (01) 12 steps from 0 to 11. When the

:No. 504<INFORMATION SELECT>

11(11)

menu switch is set to “MODE + TIME>,

 

setting to “0” is not possible.

 

* The tape remaining time indication

 

position on screen can be changed up

 

and down with this switch.

504INFORMATION SELECT

Details: Selects which information is displayed on the on-screen display.

Setting:

TIME (00): Time data is displayed qMODE+TIME (01): Time data and tape running

mode are displayed.

505REMAIN ENABLE

Details: Selects whether or not the tape remaining time is shown on the on-screen display.

Setting:

qOFF (00): Remaining time is not shown.

ON (01): Remaining time is shown.

514TIME DISPLAY SELECT

Details: Selects the type of time data displayed.

Setting:

 

DATE (00):

Shows the date.

CLOCK (01):

Shows the time.

DATE+CLOCK (02): Shows the date and time.

qTC (03):

Shows the time code data.

516DISPLAY SELECT

Details: Selects the type of data displayed on the tape counter in the LCD display.

Setting:

qTC (00): Shows the time code data. CLOCK (01): Shows the date and time. You can

switch between date and time with the [COUNTER] switch.

22

23

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Before operating this unit, please read Thank you for purchasing this JVC productInstructions carefully to ensure Best possible performance For Customer UseLength Port CableMeters For Your Safety Australia Safety PrecautionsThis unit should be used with 120 V AC only Mains Supply AC 230 V `Maintenance Major featuresIntroduction Precautions for use of head cleaning tape PrecautionsIntroduction Rear panel # Y/C in connectorOn-screen display CONTROLS, Connectors and DisplaysLCD display Slave NDF HoldConnections Reference sync signalAudio system connections OutputsPower sockets Remote connectorOther connections Editing system examplesBR-DV600UA/EA Edit adjust settingBR-DV600UA Menu switch organization Menu SwitchesMenu switch group select screen Menu switch setting screenMenu switch details Menu SwitchesAuto REW AT Timer Edit AdjustBattery Select Remote FF/REW ModePreparation PreparationRecording RecordingPlayback preparation Playback Repeat playPreset External TIMER-START FunctionTime Code DisplayTime Code Playback Super Scene Finder FunctionPlayback time code Command tables Backup Recording Function 12 RS-232C Interface12-3 RS-232C commands 12-2 RS-232C specificationsVCR operation commands 12 RS-232C InterfaceSetting preset commands Information gathering sense commandsCommands Description Contents of JVC Status Sense Contents of Status SenseError-related commands Menu switch check command Menu switch setting commandED Memory SW Preset ComponentOperation Solution TroubleshootingDEW indicator lights Counter displayOther problems SpecificationsOptional equipment

BR-DV600EA, BR-DV600UA specifications

The JVC BR-DV600UA and BR-DV600EA are professional digital video recorders that have gained recognition in the broadcasting and media production industries due to their advanced features and reliability. These models are tailored for video professionals who require high-quality video capture and playback capabilities.

One of the standout features of the BR-DV600 series is its compatibility with various formats, including DVCAM, DVCPRO, and standard DV, making it an adaptable option for many users. The ability to record in multiple formats allows for flexibility in production workflows, accommodating diverse client needs and project requirements.

The BR-DV600UA and BR-DV600EA are equipped with robust transport mechanisms, ensuring stable and accurate playback. This reliability is crucial in professional settings where quality cannot be compromised. The units are designed to withstand the rigors of daily use, featuring durable construction that protects the internal components.

A notable technology integrated into these recorders is JVC's innovative digital signal processing, which enhances the overall video quality. This technology ensures improved color reproduction and finer detail, resulting in footage that meets the high standards of professional productions. Furthermore, the devices support real-time editing capabilities, which allow for seamless transitions and effects during the recording process, thus expediting post-production.

Another key characteristic of the BR-DV600 series is its comprehensive connectivity options. The recorders come equipped with multiple input and output interfaces, including FireWire (IEEE 1394), composite, and SDI connections. This versatility enables users to integrate the units into various production environments easily, whether for live events, studio recordings, or field productions.

User-friendly operational design is also evident in these models. The intuitive interface, clear LCD displays, and accessible controls facilitate ease of use, allowing operators to focus on their craft without being hindered by complicated setups. The built-in editing functions further enhance usability, enabling quick adjustments and refinements on the fly.

In summary, the JVC BR-DV600UA and BR-DV600EA digital video recorders stand out in the professional video market due to their format versatility, advanced digital processing technologies, reliable construction, and user-friendly designs. These features collectively make them an excellent choice for videographers, broadcasters, and production companies seeking dependable and high-quality recording solutions.
Top Page Image Contents