JVC BR-DV600UA manual Troubleshooting, Operation Solution, Counter display, DEW indicator lights

Page 25

13 TROUBLESHOOTING

13 TROUBLESHOOTING

13-1 Warning indicators

 

 

If the unit malfunctions during operation, the built-in self-diagnostics system identifies the problem and displays a warning

message on the monitor and/or the counter display. Also, the [AUTO OFF] indicator may be shown on the LCD. In this case,

turn the power off and then on again to restore operation. If the [AUTO OFF] indicator appears again, the VCR may require

repair or adjustment. Consult your local JVC dealer.

 

 

The VCR’s built-in microprocessor is susceptible to interference from externally generated noise or electro-magnetism. In this

case, turn the main power (AC and DC power supplies) off, turn on again and check the operation.

On-screen display

Error contents

Operation

Solution

On-screen display Counter display

SUP REEL FAILURE ERR7202~ 7203

TAKE UP REEL FAILURE ERR7302~ 7303 SYSCON REF ERROR

Error contents

The supply reel rotation is abnormal.

The takeup reel rotation is abnormal.

Operation

Solution

Operation stops. No

Turn the power on again. In

operations are possible.

some cases, the tape may

 

be damaged, so use a

 

different tape. If the problem

 

persists, consult your JVC

 

dealer.

Counter display

ERR8400

System controller reference signal failure.

Operation stops. No operations are possible.

Turn the power on again.

CONDENSATION ON DRUM

The [DEW] indicator lights.

FAILURE LOADING

ERR3200

Condensation on the drum.

• When a cassette is not

 

loaded, the drum starts to

 

rotate.

 

• When a cassette is loaded,

 

the AUTO OFF mode is

 

engaged and the operation

 

stops.

Tape cannot be loaded.

Operation stops. No

 

operations are possible.

Wait for the drum to stop rotating, then load a cassette.

Do not use the unit until the AUTO OFF mode is disengaged.

Turn the power on again. In some cases, the tape may be damaged, so use a different tape. If the problem persists, consult your JVC dealer.

PC TAPE INHIBIT

Pc7APE

LP INHIBIT

LPiNh

REC INHIBIT

REciNh

1394 INHIBIT

A data tape for personal computer is used.

A tape recorded in the LP mode is played back.

The cassette’s safety slide is set to “SAVE”. Copy-guarded signals are input.

No signal is input to the [DV IN/OUT] connector.

Operation continues.

Operation stops.

Operation stops.

Operation stops.

Use a tape on which NTSC (U MODEL), PAL (E MODEL) signals are recorded.

Use a tape recorded in the SP mode.

Set the safety slide to “REC”. Copy-guarded signals cannot be recorded.

Input signals to the [DV IN/ OUT] connector.

FAILURE UNLOADING ERR3300 CASSETTE EJECT FAILURE ERR4100 HOUSING FAILURE ERR4200 TAPE DEFECTIVE ERR5605 TAPE DEFECTIVE ERR5607 END LEADER DETECTION

Tape cannot be unloaded.

Tape is jammed.

The eject operation is abnormal.

The cassette housing is abnormal.

The tape is broken.

The tape is slack.

The tape end sensor is abnormal.

1394iNh

EE CHECK INHIBIT

EEiNh

AUDIO DUB INHIBIT

ADBiNh

Copy-guarded signals are input.

When the IEEE 1394 input is selected, the EE check is performed.

The cassette’s safety slide is set to “SAVE”. The tape was recorded with the 48 kHz sampling rate. The No. 245 <SAMPLING RATE> menu switch is set to “48K”. Audio dubbing was attempted on a tape recorded in the LP mode. The video input is set to “DV IN”.

Operation continues.

Operation stops.

Copy-guarded signals cannot be recorded.

When the IEEE 1394 input is selected, the EE check cannot be performed.

Set the safety slide to “REC”. Use a tape recorded at the 32 kHz sampling rate. Set the No. 245 <SAMPLING RATE> menu switch to “32K”. Audio dubbing cannot be performed on tapes recorded in the LP mode. Set the video input to a position other than “DV IN”.  See “Audio dubbing” on page 27.

ERR5702

BEGIN LEADER DETECTION ERR5802 DRUM MOTOR FAILURE ERR7001

CAP MOTOR FAILURE ERR7101

The tape beginning sensor is abnormal.

The drum rotation stops.

The capstan rotation stops.

SSF INHIBIT

SSF data error occurs.

 

 

SSFiNh

 

FAN MOTOR FAILURE

The fan motor stops.

 

 

FAN

STOP

 

HEAD CLOG

The video head is clogged.

 

 

HEAD

CLOG

 

Operation continues.

Operation stops about 60 seconds after the fan motor stops (with the No. 397 <FAN STOP SHUTDOWN> menu switch set to “ENABLE”).

The operation continues.

Use a tape on which SSF data has been properly recorded.

Consult your nearest JVC dealer.

Clean with a dedicated head cleaning tape. Refer to page 7.

46

47

Image 25
Contents Before operating this unit, please read Thank you for purchasing this JVC productInstructions carefully to ensure Best possible performance For Customer UseLength Port CableMeters For Your Safety Australia Safety PrecautionsThis unit should be used with 120 V AC only Mains Supply AC 230 V `Maintenance Major featuresIntroduction Precautions for use of head cleaning tape PrecautionsIntroduction Rear panel # Y/C in connectorOn-screen display CONTROLS, Connectors and DisplaysLCD display Slave NDF HoldConnections Reference sync signalAudio system connections OutputsPower sockets Remote connectorOther connections Editing system examplesBR-DV600UA/EA Edit adjust settingBR-DV600UA Menu switch organization Menu SwitchesMenu switch group select screen Menu switch setting screenMenu switch details Menu SwitchesAuto REW AT Timer Edit AdjustBattery Select Remote FF/REW ModePreparation PreparationRecording RecordingPlayback preparation Playback Repeat playPreset External TIMER-START FunctionTime Code DisplayTime Code Playback Super Scene Finder FunctionPlayback time code Command tables Backup Recording Function 12 RS-232C Interface12-3 RS-232C commands 12-2 RS-232C specificationsVCR operation commands 12 RS-232C InterfaceSetting preset commands Information gathering sense commandsCommands Description Contents of JVC Status Sense Contents of Status SenseError-related commands Menu switch check command Menu switch setting commandED Memory SW Preset ComponentOperation Solution TroubleshootingDEW indicator lights Counter displayOther problems SpecificationsOptional equipment

BR-DV600EA, BR-DV600UA specifications

The JVC BR-DV600UA and BR-DV600EA are professional digital video recorders that have gained recognition in the broadcasting and media production industries due to their advanced features and reliability. These models are tailored for video professionals who require high-quality video capture and playback capabilities.

One of the standout features of the BR-DV600 series is its compatibility with various formats, including DVCAM, DVCPRO, and standard DV, making it an adaptable option for many users. The ability to record in multiple formats allows for flexibility in production workflows, accommodating diverse client needs and project requirements.

The BR-DV600UA and BR-DV600EA are equipped with robust transport mechanisms, ensuring stable and accurate playback. This reliability is crucial in professional settings where quality cannot be compromised. The units are designed to withstand the rigors of daily use, featuring durable construction that protects the internal components.

A notable technology integrated into these recorders is JVC's innovative digital signal processing, which enhances the overall video quality. This technology ensures improved color reproduction and finer detail, resulting in footage that meets the high standards of professional productions. Furthermore, the devices support real-time editing capabilities, which allow for seamless transitions and effects during the recording process, thus expediting post-production.

Another key characteristic of the BR-DV600 series is its comprehensive connectivity options. The recorders come equipped with multiple input and output interfaces, including FireWire (IEEE 1394), composite, and SDI connections. This versatility enables users to integrate the units into various production environments easily, whether for live events, studio recordings, or field productions.

User-friendly operational design is also evident in these models. The intuitive interface, clear LCD displays, and accessible controls facilitate ease of use, allowing operators to focus on their craft without being hindered by complicated setups. The built-in editing functions further enhance usability, enabling quick adjustments and refinements on the fly.

In summary, the JVC BR-DV600UA and BR-DV600EA digital video recorders stand out in the professional video market due to their format versatility, advanced digital processing technologies, reliable construction, and user-friendly designs. These features collectively make them an excellent choice for videographers, broadcasters, and production companies seeking dependable and high-quality recording solutions.