JVC BR-DV600EA Connections, Audio system connections, Reference sync signal, Outputs, Inputs

3 CONNECTIONS

3-1 Video system connections

3 CONNECTIONS

3-2 Audio system connections

Video output from a VCR, etc.					Sync signal generator, etc.
	Input				External sync signal
	Composite	Component
Y/C	DV
	DV
	IN/OUT	COMPONENT
	VIDEO				AUDIO
	LINE				CH 1/3 CH 2/4
	Y/C				IN	PGZ01945
	IN	R-Y	B-Y	IN
		Y
				OUT
	OUT				OUT
					MONITOR
					OUT
	MONITOR		OUT	IN	1 REMOTE	2
	OUT	SYNC IN	TIME CODE	SERIAL
			TIMER			DC 12V
		REC	PLAY
			OFF
					Composite
Y/C	DV Composite			Component
		Output				Monitor TV
Video input to a VCR, etc.

Reference sync signal
This unit automatically selects the sync signal as shown in
the table below, depending on the presence of external sync
input (SYNC IN) and video input (VIDEO IN), the No. 003
<SYNC SELECT> menu switch setting and operation mode.
When IEEE 1394 input is selected, “INT” is selected
regardless of the setting. When the No. 108 <VIDEO
INPUT SELECT> menu switch is set to “COMPONENT”,
the operation is the same as that performed with the No.
003 <SYNC SELECT> menu switch set to “AUTO”
regardless of the setting.
SYNC IN			No	Yes	No	Yes
VIDEO IN			No	No	Yes	Yes
EXTERNAL		Playback	INT	EXT	INT	EXT
		Recording	INT	INT	VIDEO	VIDEO
AUTO		Playback	INT	EXT	VIDEO	EXT
		Recording	INT	INT	VIDEO	VIDEO
	INT: Internal sync		EXT: External sync		VIDEO: Video sync
	Notes:

Audio output from a VCR, etc.
DV				Analog audio (2 channels)
DV
IN/OUT	COMPONENT
VIDEO			AUDIO
LINE			CH 1/3	CH 2/4
Y/C				IN	PGZ01945
IN	R-Y	B-Y	IN
	Y
			OUT
OUT				OUT
				MONITOR
				OUT
MONITOR		OUT	IN	1 REMOTE	2
	SYNC IN
OUT		TIME CODE	SERIAL
		TIMER
					DC 12V
	REC	PLAY
		OFF
DV	Analog audio			Analog audio
	(2 channels)			(monaural)
Audio input to a VCR, etc.

Headphones

Mic

Monitor TV

Connecting a monitor

The on-screen display can be viewed on a monitor

connected to the [VIDEO MONITOR OUT] connector.

Connecting video equipment

Connect the video device to the appropriate connector

(4 types are available).

Outputs

5 Analog outputs

Composite signal : [LINE OUT] connector (BNC)

Component signal (Y/B-Y/R-Y) : [COMPONENT OUT]

•	The phase of the output signal cannot be adjusted
	for external sync signals. The sub carrier cannot be
	locked.
•	Plugging and unplugging the external sync or video
	signal connector during operation causes distortion
	in the picture and sound for about 10 seconds.
•	When signals input from the composite connector
	are output from the component connector, color may
	disappear in some parts of the left section of the
	monitor screen. This is not a malfunction.
•	The set up is not applied to signals input to the
	[DV IN/OUT] connector and output in EE mode
	(component, Y/C, composite). Input signals are

Connection with a monitor TV The audio output from the [AUDIO MONITOR OUT] connector is monaural. Use the front panel [AUDIO MONITOR] switch or No. 211 <AUDIO MONITOR> menu switch to select the audio channels you want to monitor. The selected audio channel is shown in the table below. Adjust the audio volume level on the monitor.  See “Playback preparation” on page 28.

Headphones jack Audio can be monitored in stereo using the headphones. Use the front panel [AUDIO OUTPUT] switch to select the audio channels you want to monitor. The selected audio channel is shown in the table below. Adjust the audio volume level with the front panel [PHONES] control.

5Digital outputs

Digital signals conforming to IEEE 1394 are output from the [DV IN/OUT] connector.

Relationship between [AUDIO OUTPUT] / [AUDIO MONITOR] switch and audio output channel (During playback with 32 kHz sampling, audio dubbing, and DV input with the 32 kHz sampling in the EE mode) Regardless of setting of this switch, CH1/2 is selected for ordinary recording, record pause and analog audio input in the

EEmode. CH3/4 is selected for audio dubbing in the Pause mode.

With the No. 054 <SLIDE SW FUNCTION> menu switch set to “AUDIO”.

	connectors (BNC x 3)
YC signal : [Y/C OUT] connector (4-pin)
5 Digital output
Digital video signal (conforming to IEEE 1394)
[DV IN/OUT] connector
Inputs
Select input video signals with the front panel’s [VIDEO
INPUT] switch or the No. 108 <VIDEO INPUT SELECT>
menu switch.
5 Analog inputs
Composite signal :	[LINE IN] connector (BNC)
Component signal (Y/B-Y/R-Y) : [COMPONENT IN]
	connector (BNC x 3)
YC signal : [Y/C IN] connector (4-pin)
5 Digital input
Digital video signal	: [DV IN/OUT] connector
(conforming to IEEE 1394)
Note:

•When search pictures or low-quality video signals are input, temporary distortion of picture or sound may occur. Clean up the signals with a TBC or

other processing device before inputting.

	recorded as is.
•	Use a video signal of less than 1 V(p-p) such as a
	black burst signal for external sync signal.
•	When video signals are input to the DV IN/OUT
	connector, distortion may occur in the lower section
	of the picture in the EE mode. However, recording
	is performed normally.
•	When the No. 003 <SYNC SELECT> menu switch is
	set to “EXTERNAL” and no signal is input to the
	[SYNC IN] connector, noise may appear in the

playback picture. This is not a malfunction.

Inputs

5Analog inputs

Audio connectors (CH1/3, CH2/4) Analog input connectors are only provided for 2 channels. It is not possible to record 4 channels simultaneously. Audio input from each connector is normally recorded on the CH1 and CH2 channels. Recording on the CH3 and CH4 can be performed in the Audio Dubbing mode with the No. 245 <SAMPLING RATE> menu switch set to “32K”. For audio dubbing, refer to “Audio dubbing” on page 27.

5 Digital inputs Digital signals conforming to IEEE 1394 can be input to the [DV IN/OUT] connector. In this case, the audio recording level cannot be adjusted. When audio signals are input to the [DV IN/OUT] connector, some noise will occur at the point where recording ends. To reduce this noise during playback, set the No. 214 <V. FADE> menu switch to “ON”.

5 Mic input jack Connect a monaural microphone. The same audio is recorded on both channels.

Outputs

5 Analog outputs Audio connectors (CH1/3, CH2/4) Analog output connectors are provided for 2 channels. For MiniDV format, use the front panel [AUDIO OUTPUT] switch to select for 4-channel audio. The selected audio channel is shown in the table below.  See “Playback preparation” on page 28.

	AUDIO switch
MONITOR		OUTPUT
	L		CH1/2
			MIX
			CH3/4
	MIX		CH1/2
			MIX
			CH3/4
			CH1/2
	R		MIX
			CH3/4

	Connector
MONITOR OUT	AUDIO OUT
	CH1/3	CH2/4
CH1	CH1	CH2
CH1/3	CH1/3	CH2/4
CH3	CH3	CH4
CH1/2	CH1	CH2
CH1/2/3/4	CH1/3	CH2/4
CH3/4	CH3	CH4
CH2	CH1	CH2
CH2/4	CH1/3	CH2/4
CH4	CH3	CH4

12 13