10
Setting the Clock
There are two ways to set the clock. With manual clock setting, you tell the VCR the current time. The VCR then adjusts the time accordingly. With automatic clock setting, the VCR gets the current time from your local PBS station. It keeps track of the time by constantly referring to the time broadcasted by your PBS station.
Follow the instructions under either man-
ual clock setting or automatic clock set- ting (page 11) to set the VCR's clock. Make sure:
eThe VCR is hooked up and turned on, and channels are programmed into the VCR's memory.
•The VCR is in VCR position (see pages 13,
•You make each entry within 60 seconds of the previous entry (otherwise, the VCR will exit Clock Set mode and you will have to start over).
•You have correctly chosen TV or CABLE TV at the TUNER SET UP menu.
Manual Clock Setting
1
Press the MENU button to bring up the main menu display.
?SELECT PUSH NO. SHOWN_
1 | PROGRAM | |
2 VCRSETUP | / | |
3 | TUNER SET UP | |
4 | SET CLOCK | l |
| ,€ | / |
|
| |
_,,_ END PUSH F.XIT | J |
2
Press the Number 4 button to select
SET CLOCK.
UTO CLOCK [OFF]
I2 SET MANUALCLOCK / I 3 DAYLIGHTSVG TIME IOFFJ
/ CABLEBOXUSERS /
{SET CLOCK MANUALLY /
\TO SELECT PUSH NO. SHOWN )
END PUSH EXIT | J |
3
If ON appears to the right of AUTO CLOCK, press the Number 1 button.
OFF will appear to the right of AUTO CLOCK.
4
Press the Number 2 button to select
SET MANUAL CLOCK.
END PUSH _ff
5
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.
•Enter a 0 before a single digit num- ber.
•Entries that do not match the VCR's internal calendar will cause a ques- tion mark (?) to appear
•To make corrections, press the CLEAR button until the space for the number you want to correct is
flashing. Then enter the correct number.
IT_ TIME 0_,15 PM
CORRECTPUSH CLEAR }
ENDPUSH EXIT
6
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 1996, press 07, 01, 96. The day of the week will appear automatically.
CORRECTPUSH CLEAR ]
ENDPUSH EXIT | _' |
7
Press the STATUS/EXIT button to start the clock. The screen will return to the program you were watching.
Daylight-Saving Time
Selection
Follow the steps below to program the VCR so its clock will automatically
move forward one hour in April and turn back one hour in October.
1
Press the MENU button to bring up the main menu display.
SELECT PUSH NO. SH_
PROGRAM | |
VCR SET UP | / |
TUNER SET UP | |
SET CLOCK | J |
_'_0 END PUSH EXIT | / |
2;
Press the Number 4 button to select
SET CLOCK.
(flA _CLocK
UTO CLOCK | {OFF] I |
I2 sETMANUALCLOCK l
I | 3 DA_GHT SVG _ME [OFF] I |
i | CABLEBOXUSERS / |
l SET CLOCK MANUALLY /
TO SELECT PUSHNO. SHOWN )
_0 END PUSH EXE
Press the Number 3 button so that ON
appears to the right of DAYLIGHT SVG TIME.
UTO CLOCK [OF
I2 SET MANUALCLOCK / I 3 DAYLIGHTSVGTIME {ON]
/CABLE BOX USERS ]
[SET CLOCK MANUALLY /
\TO SELECT PUSH _. SHOWN /
_TO END PUSH EXIT | J |
4
Press the STATUS!EXIT button to exit.