9
Recordin
Read and follow the steps below to record : a television program.
il
I | it to channel 3 or 4. | set |
|
|
Turn the TV on and | • | Turn the TV on and set it to channel 3 or | ||
|
| TV and VCR | ||
|
|
| i | 4, whichever the CH3/CH4 switch on the |
,&
back of the VCR is set to.
Insert a tape with its record tab intact (see
• page five) in the VCR. The power will : come on, and the
3
Make sure the VCR light is on. If the light is not on,
press the VCR/TV button once.
To stop recording, press the STOP button.
O c==:90
Press the
REC(ord)/OTR btttton once to
start recording.
O0 0000 O0
Insert a tape.
7
Press the PAUSE/STILL button once to pause recording. To start recording again, press the
PAUSE/STILL button
m
again or press the
5
Use the CHANNEL (Up/Down) buttons or the Number but- tons to select the
channel you want to record.
iwil3aPpear"
!If the VCR light on the display panel of
i the VCR appears, go to step 4. If the
:VCR light does not appear, press the
:VCR/TV button once.
i4
iPress the (Tape) SPEED button on the
: remote control until the desired tape
ispeed (see page five) appears on the TV
:screen. The tape speed will disappear
:from the screen after about five seconds.
5
buttons to select the chan- be recorded.
hNCHArNNEL (Up/Down)buttons
Press the REC(ord)/OTR button once to
•start recording. The REC light will
:appear.
Press the (Tape)
SPEED button to Remote Control
•If the REC(ord)/OTR button is pressed while a tape without a record tab is
in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash
•Other recording options are on pages 18 - 26.
°You can change the tape speed while the VCR is recording, but some distor- tion will appear on the tape.
i7
iTo pause the recording (for example, dur- ing commercials), press the PAUSE/
STILL button once. The REC light will
:flash.
:To start recording again, press the
•i REC(ord)/OTR button or the PAUSE/ STILL button again. The REC light will appear again.
i8
i To stop recording, press the STOP button.