Magnavox VRU344AT manual Hooking Up Your VCR, fl #, Example only, Antenna Jack, Wall

6

Hooking Up Your VCR

The basic VCR/TV connection - antenna/cable to VCR to TV - is shown below. For other hookups, including those that use

cable converter/descrambler boxes, see pages 36 - 39.

1				Back of TV
	\\\ fl #	//// .	.
	\_/////	_	Indoor Antenna	(example only)

Disconnect the antenna or

IOutdoor Antenna _

cable from your T¥.

m" L"

Antenna Jack

2

Connect the antenna/cable to your VCR.

3

Connect your VCR to your TV using the black RF coaxiol cable (supplied). Make sure both the TV and the VCR are plugged in.

4

Select channel 3 or 4.

Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever channel is not used or least used in your area. To oper- ate your VCR with your TV, set the TV to the same channel. For example, when playing a

tape, if the CH3/CH4 switch is set to CH3, the TV should be on channel 3.

\\\ D // IIII ,		,
	_				ANT(enna).		IN(put) Jack
	__B-			...........			OUT(pu,,
							Jack
	Antenna	or Cable
				ANT(enna).			Back of TV
			/	IN(put)	Jack		(example only)
		i_-_	_'//OUT(put)			Jack
I	Back of VCR		_coaxiaicable		I	_	\
Wall	Outlet			(supplied)	J	cVomHbFi/_JnaHtiFon

Antenna Jack

/\

-IIOO01109BOIlOg°e'"o

Wall

Outlet

TV

I Switch