Recording One Channel/Watching Another 31
1
Press the VCR button.
2
Press the REC(ord)/OTR button to start a recording of the current channel. (See page 30.)
3
Press the VCR/TV button to put the VCR in TV position. The VCR light will disappear from the VCR’s display panel.
4
Press the TV button, then press the CH(annel) o/p or
Number buttons to select the channel you want to watch at the TV. (If the VCR remote control doesn’t operate your TV, use the TV remote control to select the channel.)
5
To return to the channel being recorded, press the TV button, then use the Number buttons to select channel 03 or 04 at the TV (whichever channel the CH3/CH4 switch on the back of the VCR is set to).
(If the VCR remote control doesn’t operate your TV, use the TV remote control to select channel 03 or 04.)
1&6 |
| |||
|
| 3&7 | ||
| POWER | VCR/TV |
| EJECT |
| VCR | TV |
| CBL/DBS |
8 |
| PLAY |
|
|
REW |
|
| F.FWD | |
| STOP |
|
| |
MENU | STATUS/EXIT | CLEAR | ||
| 1 | 2 | 3 |
|
| 4 | 5 | 6 | CH |
|
| |||
| 7 | 8 | 9 |
|
| ENTER | ALT. CH | ||
|
| 0 |
| VOL |
|
|
|
|
SPEED | TIME SEARCH | PAUSE/STILL |
|
2 REC/OTR | MEMORY | SLOW | MUTE |
6
Press the VCR button.
7
Press the VCR/TV button to put the VCR in VCR posi- tion. The VCR light will appear on the display panel. The channel being recorded will appear on the screen.
8
Press the STOP/p button to stop the recording.
Helpful Hints
•If your VCR remote control does not operate your TV, see page 21 for details.
•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages