Topfield TF 5400 PVR manual Inserting batteries in the remote control

Page 22

16 Setup

In this case, you will need to connect a ca- ble from the RF OUT socket to the antenna connector on your television. To ensure your television can also pick up existing analogue channels as well, you will need to connect a cable from your television antenna or from the RF LOOP OUT connector on the back of the digital receiver to RF IN connector.

2.4.3 Connecting to your video cassette recorder

The digital receiver also can output video to another appliance such as video cassette recorder or video receiver through an auxiliary SCART connector.

You should prepare a SCART cable to use the auxiliary SCART connector. Plug one end of the cable into the VCR socket on the digital receiver, and the other end into the match- ing socket on your video cassette recorder or suchlike.

2.5Inserting batteries in the remote control

To insert the batteries, open the battery compartment by re- moving the lid, and then insert the batteries observing the po- larity, which is marked on the base of the battery compart- ment.

If the digital receiver no longer reacts properly to remote con- trol commands, the batteries may be ﬂat. Be sure to remove used batteries. The manufacturer accepts no liability for dam- age resulting from leaking batteries.

NOTE

Image 22

Contents TF 5400 PVR Combo Page Contents Service Search Listing Services Index Introduction IntroductionControlling the digital receiver Front panel Introduction Remote control Are also used to change the options for a menu item Controlling the digital receiver What is common interface? To watch a pay service, you should take the following stepsSafety precautions SetupUnpacking Setup Rear panel connections Rear panel connections Physical speciﬁcationAudio L/R Connecting to the antenna Connecting up your digital receiverConnecting to your television To use the Scart connector To use the composite video connector Inserting batteries in the remote control Connecting to your video cassette recorderInserting batteries in the remote control Preference Settings Language settingsVideo and audio settings Subtitle languageTelevision standard Color modelVideo cassette recorder Television aspect ratioSound mode Local time setting RF outputPreference Settings Parental control Parental control Time offset table CityPreference Settings To use the time shift feature Adjusting on-screen displaySetting for MediaHighway EPG Preference Settings Searching satellite broadcasting services Service Search1 Conﬁguring LNB settings Other is K u band which ranges approximately from 12 to 2 Conﬁguring DiSEqC 1.2 settings Service Search 3 Conﬁguring Usals settings Searching services Searching satellite broadcasting services Service Search Searching terrestrial broadcasting services Copying services Resetting to factory settingsDaily Usage Watching television Watching favorite services Viewing program information Selecting audio track Selecting subtitle trackViewing electronic program guide Viewing teletextWatching multifeed program Watching by time shiftDaily Usage Watching by picture in picture Daily Usage Listing Services Editing the service listListing Services Editing the favorite list Editing the favorite listListing Services Transferring receiver data Restart the digital receiver Recording and Playing Immediate recording by the remote control Recording a programRecording a program Recording by the recording menu Making a timer recording Recording and Playing Recording when using time shift Recording by electronic program guideTo record a pay service File list To make a new folderTo move a ﬁle to another folder Playing back a recording To lock a recording ﬁleTo play back in slow motion To play back in fast motionTo play back recordings in sequence To make a bookmarkTo play back a recording repeatedly To play back a scrambled recording Editing a recordingTo erase a block from a recording To store a block from a recording Playing a MP3 Formatting hard disk Transferring recording ﬁlesTransferring recording ﬁles Topﬁeld Application Program Page Firmware Update From a broadcaster From your computer via USB portFrom your computer via RS-232 port From another digital receiver via RS-232 port Firmware Update Index Index RF Loop OUT Usals Page Correct disposal of this product