70 Recording and Playing
7.4.2 To store a block from a recording
You can store a block from a recording file by performing the following steps:
1.Start playback of a recording file you want.
2.Press 
button to display a progress bar.
3.Find one end position of a block you want to specify
with 
button or 
button.
4.Press 
button at the position, then the pointer starts to blink.
5.Find the other end position.
6.Press 
button at the position again, then a confirma- tion box appears.
7.Select the Save command, then the block is stored. The stored file will named after its source file with a suffix of ‘CUT’ and a number
In addition, you can copy a recording file in whole or in part when playing back it.
1.Start playback of a recording file you want.
2.Find a desired position from which a copy will be started
with 
button or 
button.
3.Press 
button.
4.Pressing 
button stops copying. The copied file will be named after its source file with a suffix of ‘COPY’ and a number.
Once a copy is started, a copying symbol like the 
next figure will be displayed on the right top of the screen for a few seconds. To see copying status, press 
button. The outer circle of the copying symbol indicates
progress rate.