Topfield TF 5400 PVR manual Other is K u band which ranges approximately from 12 to

Page 36

30 Service Search

 

The other is Ku band which ranges approximately from 12 to

 

18 GHz.

 

The LNB (Low Noise Block converter)

 

is used to take a wide band of rel-

LNB

atively high frequencies, amplify and

 

convert them to similar signals carried

 

at a much lower frequency, which is

 

called IF (Intermediate Frequency).

 

High frequencies from satellites are

 

converted into from 950 to 2150 MHz by

 

a LNB.

 

Select the Installation > Satellite

 

Setting > LNB Setting menu to

 

configure the LNB settings.



Pressing the OK button on the Satellite Name option displays the satellite list in alphabetic order. Select the satellite toward which your antenna sets its face.

The digital receiver has a database about broadcasting satel- lites and their transponders, containing the following infor- mation: satellite position, frequency range, symbol rate, po- larization and LNB frequency corresponding to the frequency range. So you might not have to specify the LNB Frequency option. However, if you have selected the Other entry at the Satellite Name option to specify a satellite that is not in the

Image 36
Contents TF 5400 PVR Combo Page Contents Service Search Listing Services Index Introduction IntroductionControlling the digital receiver Front panel Introduction Remote control Are also used to change the options for a menu item Controlling the digital receiver What is common interface? To watch a pay service, you should take the following stepsSetup Safety precautionsUnpacking Setup Rear panel connections Rear panel connections Physical specificationAudio L/R Connecting up your digital receiver Connecting to the antennaConnecting to your television To use the Scart connector To use the composite video connector Inserting batteries in the remote control Connecting to your video cassette recorderInserting batteries in the remote control Preference Settings Language settingsVideo and audio settings Subtitle languageTelevision standard Color modelVideo cassette recorder Television aspect ratioSound mode Local time setting RF outputPreference Settings Parental control Parental control Time offset table CityPreference Settings Adjusting on-screen display To use the time shift featureSetting for MediaHighway EPG Preference Settings Service Search Searching satellite broadcasting services1 Configuring LNB settings Other is K u band which ranges approximately from 12 to 2 Configuring DiSEqC 1.2 settings Service Search 3 Configuring Usals settings Searching services Searching satellite broadcasting services Service Search Searching terrestrial broadcasting services Copying services Resetting to factory settingsDaily Usage Watching television  Watching favorite services Viewing program information Selecting audio track Selecting subtitle trackViewing electronic program guide Viewing teletextWatching multifeed program Watching by time shiftDaily Usage Watching by picture in picture Daily Usage Listing Services Editing the service listListing Services Editing the favorite list Editing the favorite listListing Services Transferring receiver data Restart the digital receiver Recording and Playing Immediate recording by the remote control Recording a programRecording a program Recording by the recording menu Making a timer recording Recording and Playing Recording when using time shift Recording by electronic program guideTo record a pay service File list To make a new folderTo move a file to another folder Playing back a recording To lock a recording fileTo play back in slow motion To play back in fast motionTo play back recordings in sequence To make a bookmarkTo play back a recording repeatedly Editing a recording To play back a scrambled recordingTo erase a block from a recording To store a block from a recording Playing a MP3 Formatting hard disk Transferring recording filesTransferring recording files Topfield Application Program Page Firmware Update From a broadcaster From your computer via USB portFrom your computer via RS-232 port From another digital receiver via RS-232 port Firmware Update Index Index RF Loop OUT Usals Page Correct disposal of this product