4.1 Searching satellite broadcasting services 33
5.Finally select the Store command at the Motor Control menu to save the tuned position when the receiving qual- ity has turned good.
There are more motor control commands for installers, but this manual does not describe them. If you are an installer, refer them to the manual for the STAB rotor.
4.1.3 Configuring USALS settings
USALS (Universal Satellite Automatic Location System), also known as DiSEqC 1.3, calculates the positions of all available satellites from your location. Compared to DiSEqC 1.2, it is no longer required to manually search and store every satel- lite position. Just by pointing to a known satellite position is enough. This position will act as the central point. The USALS will then calculate positions of visible satellites.
To use USALS, select the Instal- lation > Satellite Setting > US- ALS Setting menu.
At first you have to set the Mo- torized DiSEqC 1.3 option to Enable.
To calculate every satellite position, perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Input your location tothe My Longitude and My Latitude V , V+ and numeric buttons.options with the
3. Input the position of your selected satellite to the Satel-