Topfield TF 5400 PVR manual Making a timer recording

Page 65

7.1 Recording a program 59

To start recording, select the Record Start; then, the Stop com- mand gets enabled. You can select that command to stop the recording.

7.1.3 Making a timer recording

You can make a program to be recorded at a specific time. Even If the digital receiver is off, it will be turned on and start recording at a time specified. The digital receiver will be turned off again as the recording ends.

To make a timer recording, se- lect the System Setting > Timer Setting menu; then a timer list appears.

To add a new timer entry, press the button, and then a timer edit box appears.

You have to set the Record option to On to record a program. If this option is set to Off, the digital receiver will be turned on at a specified time but not record; instead, you may record a program with your video recorder in this case.

If you want to record a radio program, set the Type option to Radio. Otherwise set to TV.

If you record a satellite program, set the Tuner Select option to Satellite; otherwise, set it to Terrestrial.

Set the Service option to the service which provides the pro- gram you want. Pressing the OK button on this option dis- plays a service list in which you can select a desired service.

Image 65
Contents TF 5400 PVR Combo Page Contents Service Search Listing Services Index Introduction IntroductionControlling the digital receiver Front panel Introduction Remote control Are also used to change the options for a menu item Controlling the digital receiver To watch a pay service, you should take the following steps What is common interface?Unpacking SetupSafety precautions Setup Rear panel connections Physical specification Rear panel connectionsAudio L/R Connecting to your television Connecting up your digital receiverConnecting to the antenna To use the Scart connector To use the composite video connector Connecting to your video cassette recorder Inserting batteries in the remote controlInserting batteries in the remote control Language settings Preference SettingsSubtitle language Video and audio settingsColor model Television standardTelevision aspect ratio Video cassette recorderSound mode RF output Local time settingPreference Settings Parental control Time offset table City Parental controlPreference Settings Setting for MediaHighway EPG Adjusting on-screen displayTo use the time shift feature Preference Settings 1 Configuring LNB settings Service SearchSearching satellite broadcasting services Other is K u band which ranges approximately from 12 to 2 Configuring DiSEqC 1.2 settings Service Search 3 Configuring Usals settings Searching services Searching satellite broadcasting services Service Search Searching terrestrial broadcasting services Resetting to factory settings Copying servicesWatching television Daily Usage  Watching favorite services Viewing program information Selecting subtitle track Selecting audio trackViewing teletext Viewing electronic program guideWatching by time shift Watching multifeed programDaily Usage Watching by picture in picture Daily Usage Editing the service list Listing ServicesListing Services Editing the favorite list Editing the favorite listListing Services Transferring receiver data Restart the digital receiver Recording and Playing Recording a program Immediate recording by the remote controlRecording a program Recording by the recording menu Making a timer recording Recording and Playing Recording by electronic program guide Recording when using time shiftTo record a pay service To make a new folder File listTo move a file to another folder To lock a recording file Playing back a recordingTo play back in fast motion To play back in slow motionTo make a bookmark To play back recordings in sequenceTo play back a recording repeatedly To erase a block from a recording Editing a recordingTo play back a scrambled recording To store a block from a recording Playing a MP3 Transferring recording files Formatting hard diskTransferring recording files Topfield Application Program Page Firmware Update From your computer via USB port From a broadcasterFrom your computer via RS-232 port From another digital receiver via RS-232 port Firmware Update Index Index RF Loop OUT Usals Page Correct disposal of this product