34 Service Search
4.Input the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.
5.Set the Polarization option to the polarization of your de- sired transponder.
NOTE
You could get the transponder information from a satellite magazine or web site such as http://www.satcodx.com or http://www.lyngsat.com.
To search one service of a transponder, perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Set the Search Mode option to Advanced.
3.Choose your desired transponder at the Frequency op- tion or input it with the numeric buttons.
4.Input the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.
5.Set the Polarization option to the polarization of your de- sired transponder.
6.Specify the PIDs of your desired service at the PID menu with the numeric buttons. PID (Packet Identifier) is a set of numbers that identifies transport stream packets.
To search every service of a SMATV transponder, if the digi- tal receiver is connected to a SMATV, perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Set the Search Mode option to SMATV.
3.Choose your desired transponder at the Frequency op- tion or input it with the numeric buttons.