32 Service Search
To use USALS, select the Instal- lation > USALS Setting menu.
At first you have to set the Mo- torized DiSEqC 1.3 option to Enable.
To calculate every satellite position, perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Select the tuner that is connected to the motorized an- tenna at the Tuner Select option.
3.Input your location tothe My Longitude and My Latitude V , V+ and numeric buttons.options with the
4.Input the position of your selected satellite to the Satel- lite Angle if it is not correct.
5.Select the Goto the position option. Then the antenna will turn toward your selected satellite calculating its position.
6.If the receiving quality, which is displayed on the right bottom on the screen, is not good, then tune the antenna finely with the options of the Move menu. The changed position is automatically saved at one. At this time you had better check the receiving quality of every trans- ponder and choose the best one at the Transponder (or Frequency) option. It will be helpful to your fine tuning.