Topfield TF 6000 PVR manual To use the Scart connector

Page 19

2.4 Connecting up your digital receiver 13

quality. If your television does not have the matching connec- tor then use the next connector in the following order for best picture quality.

1.SCART connector (TV)

2.Component connector (YPbPr)

3.S-Video connector (S-VIDEO)

4.Composite connector (VIDEO)

You should conﬁgure audio and video settings after connect- ing up the digital receiver. See § 3.2 for detailed description.

To use the SCART connector

For best results with a standard television set, you should use a SCART cable, plugging one end into the TV socket on the digital re- ceiver and the other end into a free SCART socket on your television.

Some televisions have inputs via Component or S-Video con- nectors rather than SCART. If you have such a television, use an appropriate conversion cable to link the TV socket on the digital receiver to the matching socket on your television.

If you connect with a standard SCART cable, you do not have to make audio connections because the SCART connector can output stereo audio. But if you do with a conversion cable, such as SCART-to-Component, you have to make audio con- nections.

Image 19

Contents TF 6000 PVR Page Contents Service Search Topﬁeld Application Program Index Introduction FeaturesControlling the digital receiver Standby Front panelRemote control Are also used to change options for a menu item Mode 1 will work at default What is common interface? Safety precautions SetupUnpacking Physical speciﬁcation Rear panel connectionsVCR Connecting to the antenna Connecting up your digital receiverConnecting to your television To use the Scart connector To use the S-Video connector To use the component video connectorTo use the composite video connector Inserting batteries in the remote control Connecting to your video cassette recorderTo connect the audio connectors Setup Language settings Preference SettingsMenu language Subtitle language Video and audio settingsAudio language Color model Television standardTelevision aspect ratio Video cassette recorderSound mode Local time setting Local time setting Time offset table City Parental control To use the time shift feature Adjusting the on-screen displaySetting for MediaHighway program guide Searching broadcasting services Service Search1 Conﬁguring LNB settings LNB Low Noise Block converter Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings 3 Conﬁguring Usals settings To use USALS, select the Instal- lation Usals Setting menu Searching services Service Search Resetting to factory settings Copying servicesService Search Daily Usage Volume controlWatching television Button and press Watching television Viewing program information Watching favorite servicesSelecting audio tracks Selecting subtitle tracks Viewing electronic program guideViewing teletext Watching multifeed program Button. To switch to otherUsing time shift Using picture in picture Daily Usage Editing the service list Listing ServicesListing Services Editing the favorite list Tically with Button on a key enters its letter Input line Transferring receiver dataRestart the digital receiver Editing channel data on your computerListing Services Editing satellite and transponder list Editing television and radio service list Editing favorite list Listing Services Editing channel data on your computer Recording and Playing Instant recording Recording a programService you want to record, and press the button Timer recordingRecording a program Recording and Playing Recording a time-shifted program Scheduling a recording using the program guideRecording a pay service program To delete a recording File archiveTo sort recordings To rename a recording To lock a recording ﬁleTo make a new folder To move a recording to other folder Playing back a recordingTo play in fast motion To play in slow motionTo make a bookmark To play back recordings in sequence To play back a recording repeatedlyTo play back a scrambled recording Editing a recordingMP3 playback Copying a recordingTransferring recording ﬁles Instruction on how to use Altair is as follows Formatting the hard disk Topﬁeld Application Program 76 Topﬁeld Application Program Accessing The Digital Receiver To access from outdoors To access indoorsConﬁguring the router Conﬁguring the router IP conﬁguration Conﬁguring the digital receiverAdvance conﬁguration Proﬁle FCC USA Accessing the web server Accessing the web server Accessing the FTP server Accessing the FTP server Firmware Update From your computer via USB port Over the airFrom your computer via RS-232 port From another digital receiver via RS-232 port Firmware Update AC Input IndexIndex Page Transfer Firmware to Other IRD Wlan ANT Page Page Correct disposal of this product