Sherwood HSB-600, HSB-6501 manual AC Input Cord

HSB-600(A) 2006.4.25 12:29 PM 페이지 11

3.CONNECTING MULTI-ROOM SYSTEM KIT

•The multi-room system kit(sold separately) is essential for operation from a remote location.

For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.

•IR IN jack allows you to control this receiver from another room with the remote control unit.

•To control this unit from another room with the remote control unit, connect the IR IN jack to the output of the connecting block.

•If this unit is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot enter, then operation with the remote control unit will not be possible.

In such a case, connect the IR IN jack to the output of the connecting block.

■Note:

•Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted fluorescent.

4. RS-232C

• This port may be used to update the operating software, etc. for improvement in the future.

5. AC INPUT CORD

• Plug this cord into a wall AC outlet.

11