HSB-600(A) 2006.4.25 12:29 PM 페이지 12
Operations
Turn the power on.
1
•Each time the POWER(ON/STANDBY) button on the front panel is pressed, this unit is turned on to enter the operating mode (the STANDBY indicator lights up in bule) or off to enter the standby mode (the STANDBY indicator lights up in red).
•On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.
•In the standby mode, the STANDBY indicator lights up in red. This means that the unit is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
Select the desired input source.
2
•Each time the "INPUT" button on the front panel is pressed, the input source changes as follows;
HDMI 1 
HDMI 2 
AV
•Each time the input source is changed, the corresponding indicator lights up.
12