Sherwood HSB-6501, HSB-600 instruction

HSB-600(A) 2006.4.25 12:29 PM 페이지 10

2. CONNECTING TV AND THE SOURCE EQUIPMENT WITH HDMI OUTs

Note 1:

When the HDMI OUT connector of the source equipment is connected to this unit, the OPTICAL OUT of this unit can output the same digital audio signals that are input into the HDMI IN 1 or 2 connector. In such a case, if the DVI IN connector of the display equipment is connected to the HDMI OUT connector of this unit, you should connect the OPTICAL OUT jack to the OPTICAL IN jack of the display equipment(or A/V amp, receiver).

However, when the digital audio signals from DVD Audio or the multi-channel PCM signals are input into the HDMI IN of this unit, these signals cannot be output from the OPTICAL OUT of this unit.

•The HDMI connection can carry uncompressed digital video signals and digital audio signals.

•This unit can output digital video and digital audio signals from the HDMI OUT of this unit without any conversion as they were input into the HDMI IN.

■Connecting the source equipment with the HDMI OUT connector

•If your source equipment (DVD player, set-top box, etc.) has the HDMI OUT connector, connect it to the HDMI IN 1 or 2 connector of this unit using a commercially available HDMI cord.

■Connecting the source equipment with the DVI OUT connector

•If your source equipment has the DVI OUT connector compatible with DVI and High-bandwidth Digital Content Protection (HDCP), connect it to the HDMI IN 1 or 2 connector of this unit using a commercially available HDMI-DVI converter cord.

Since the HDMI-to-DVI connection cannot carry audio signals, you should make the digital audio connection(and the analog audio connection if needed) between the source equipment and the display equipment (or A/V amp, receiver)

■Connecting the display equipment

•For details on how to connect the display equipment, refer to "Connecting the display equipment with the HDMI IN connector" and "Connecting the display equipment with the DVI IN connector" on previous page.