|
| 2.4 Connecting the digital receiver 11 |
|
| ⃝ RF OUT | Analog television output socket. | |
11 |
|
| |
| ⃝ S/PDIF | Dolby Digital output socket for the au- | |
12 |
|
| |
|
| dio system. | |
| ⃝ USB | USB port for firmware update and data | |
13 |
|
| |
|
| transfer. | |
| ⃝ | Serial port for firmware update and data | |
14 |
|
| |
|
| transfer. | |
| Table 2.3: Connectors specification | ||
|
|
|
|
| TV SCART | CVBS / | |
|
| Left & right audio output | |
| VCR SCART | CVBS video output | |
|
| Left & right audio output | |
|
| CVBS / | |
|
| Left & right audio input for bypass | |
| |||
| RCA AV | Composite video output | |
|
| Left & right audio output | |
| S/PDIF | Dolby Digital audio output | |
| 9 pin | ||
|
| Transfer rate: 115.2 kbps at maximum | |
| USB | 2.0 Device | |
|
|
|
|
2.4 Connecting the digital receiver
There are several ways to install the digital receiver as de- scribed below. Install the digital receiver suitably to your tele- vision and other appliances. If you have any problem with your installation or need a help, contact your dealer or service provider.
You should configure audio and video settings after installa- tion. For detailed descriptions about audio and video settings, refer to § 3.2.