7.1 Recording a program 39
7.1 Recording a program
Once a recording is started, a recording symbol like Circle the next figure will be displayed on the right top of
the screen for a few seconds. When you are watch- ing a service different from the service being recorded, you can view a number on the center of the symbol, which indi- cates the order that the recording is started. The outer circle of the recording symbol indicates progress rate.
NOTE When a recording is finished, it might not be saved if its recording duration is less than 1 minute.
7.1.1 Immediate recording by the remote control
To record a program you are watching at present, press 
button.
To pause recording, press 
button. To resume it, press 
button again.
After a recording is started,
pressing 
displays a record- ing control box like the next fig- ure, in which you can specify its duration on which it will be ended.
A current recording will be stopped after the time set to the Duration parameter. If the information about the next pro- grams is provided through the electronic program guide, the After this program and After next program options would be available. Once the After this program option is selected, the