Topfield TF 5000 manual Sound mode, RF output

3.2 Video and audio settings 19

You cannot enjoy well wide-screen programs with your normal- screen television as the above figures show. The left figure shows a normal picture displayed in the normal screen. To watch wide-screen programs in the shape like the center fig- ure, set the 16:9 Display Format option to Letter Box; then, wide-screen pictures will be reduced to fit to the width of the normal screen. Otherwise to watch them in the shape like the right figure, set the option to Center extract; then, wide-screen pictures will be cut out on the left and right sides equally to fit to the width of the normal screen.

3.2.5 Sound mode

Basically, there are two audio sources as you can find two au- dio sockets on the back panel of the digital receiver. You can enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.

Apart from this setting, you can change the sound mode with button when you watch a program. For detailed descrip- tions about how to change the sound mode, refer to § 5.4.

3.2.6 RF output

If you have connected your television to the RF OUT socket, you should configure the RF output. The digital receiver can make an analog television from a digital television and output it through the RF OUT socket.

Set the RF Output option to the television standard that your country supports refering to Table 3.1.